NEC PX-61XM3G user manual HD/DVD/DTV input signals supported on this system, Signals

CONFIDENTIAL

Specifications For the operation of your plasma monitor, refer to “Operation Manual”.

Screen Size		1351(H) 760(V) mm
		53.2"(H) 29.9"(V) inches
		diagonal 61"
	Aspect Ratio	16 : 9
Resolution		1365(H) 768(V) pixels
Pixel Pitch		0.99(H) 0.99(V) mm
		0.039"(H) 0.039"(V) inches
	Color Processing	4,096 steps, 68.7 billion colors

Signals

Synchronization Range Horizontal : 15.5 to 110 kHz

	(automatic : step scan)
	Vertical : 50.0 to 120 Hz
	(automatic : step scan)
Input Signals	RGB, NTSC (3.58/4.43), PAL (B,G,M,N),
	PAL60, SECAM, HD*1, DVD*1, DTV*1

	45	74
1470 (57.9")	(1.8")
		(2.9")
1351 (53.2")
760 (29.9")	880 (34.7")
		119
		(4.7")
Bezel color is gray.	Units are in mm
		(inch)

Input Terminals (VIDEO1 and RGB1 can also be used as OUTPUT terminals)

		RGB
			Visual 1 (Analog)	mini D-sub 15-pin 1
			Visual 2 (Analog)	BNC (R, G, B, H/CS, V) 1*2
			Visual 3 (Digital)	DVI-D 24-pin 1*3
			Video
			Visual 1	BNC 1
			Visual 2	RCA-pin 1
			Visual 3	S-Video: DIN 4-pin 1
			DVD/HD/DTV
			Visual 1	RCA-pin (Y, PB[CB], PR[CR]) 1*1
			Visual 2	BNC (Y, PB[CB], PR[CR]) 1*1, *2
			Visual 3	DVI-D 24-pin 1*3
			Audio	Stereo RCA 3 (Selectable)
		External Control		D-sub 9-pin 1 (RS-232C)
	Sound output			9W+9W at 6 ohm
Power Supply				AC100-240V 50/60Hz
Current Rating				8.0 A (maximum)
Power Consumption				540W (typical)
Dimensions				1470 (W) 880 (H) 119(D) mm
				57.9 (W) 34.7 (H) 4.7 (D) inches
	Weight			61.0 kg / 134.5 lbs (without stand)
Environmental Considerations
		Operating Temperature		0°C to 40°C / 32°F to 104°F
			Humidity	20 to 80% (no condensation)
			Altitude	0 to 2800 m / 0 to 9180 feet
		Storage Temperature		-10°C to 50°C / 14°F to 122°F
			Humidity	10 to 90% (no condensation)
			Altitude	0 to 3000 m / 0 to 9840 feet
	Front Panel User Controls			Power on/off, Input source select,
				Volume up/down/ OSM control
	Remote Control Functions			Power on/off, Input source select, OSM
				control,Volume up/down, Cursor (UP,
				DOWN,LEFT, RIGHT), Pointer, Zoom up/
				down, Off timer, Wireless/Wired remote
				control, Split screen buttons

OSM Functions Picture (Contrast/Brightness/Sharpness/ Color/Tint/ Picture mode/Noise reduction/Color temperature/ White balance/Gamma/Low tone/Color tune), Audio (Bass/Treble/Balance/Audio input), Image Adjust (Aspect mode/V-Position /H-Position/V-Height /H- Width/Auto Picture/Fine picture/Picture adjustment), Option1 (OSM/BNC Input/D-Sub Input/RGB Select/ HD Select/Input Skip/All Reset), Option2 (Power management/Cinema mode/Long life [PLE, Orbiter, Inverse, White, Screen wiper, Soft focus]/Gray level/ S1/S2/Picture size/DVI Set up), Option3 (Timer/ Power on mode/Control lock/IR Remote/Loop out/ ID number/Video wall [Divider, Position, Disp. mode, Auto ID, Image adjust, Power on delay, PLE link, Timer]), Option4 (Sub. P detect/Zoom nav/Pic freeze/ Seamless SW), Advanced OSM, Language*, Color system, Source information

*English, German, French, Italian, Spanish, Swedish, Chinese, Russian

Downloaded From TV-Manual.com Manuals

The features and specifications may be subject to change without notice.

*1 HD/DVD/DTV input signals supported on this system

480P (60 Hz)	480I (60 Hz)
525P (60 Hz)	525I (60 Hz)
576P (50 Hz)	576I (50 Hz)
625P (50 Hz)	625I (50 Hz)
720P (60 Hz)	1035I (60 Hz)
1080I (50 Hz)	1080I (60 Hz)

*2 The 5-BNC connectors are used as RGB/PC2 and

HD/DVD2 input. Select one of them under “BNC INPUT”.

*3 Compatable with HDCP.

Supported Signals

• 640480P @ 59.94/60Hz	• 19201080I @ 50Hz
• 1280720P @ 59.94/60Hz	• 720576P @ 50Hz
• 19201080I @ 59.94/60Hz	• 1440 (720)576P @ 50Hz

•720480P @ 59.94/60Hz

•1440 (720)480I @ 59.94/60Hz

Note: In some cases a signal on the plasma monitor may not be displayed properly. The problem may be an inconsistency with standards from the source equipment (DVD, Set-top box, etc...). If you do experience such a problem please contact your dealer and also the manufacturer of the source equipment.

Other Features Motion compensated 3D Scan Converter (NTSC, PAL, 480I, 576I, 525I, 625I, 1035I, 1080I), 2-3 pull down Converter (NTSC, 480I, 525I, 1035I, 1080I (60Hz)), 2-2 pull down Converter (PAL, 576I, 625I, NTSC, 480I, 525I), Digital Zoom Function (100-900% Selectable), Video Wall 4-25 multi screen, Self Diagnosis, Image Burn reduction tools (PLE LOCK1~3, INVERSE, WHITE, ORBITER (Auto1,2/Manual), SCREEN WIPER), Color Temperature select (high/mid/mid low/low, user has 4 memories), Control lock (Except power SW), Auto Picture, Input Skip, Color Tune, Low Tone (3 mode), Auto ID, Programmable Timer, Gamma Correction

(4 mode), Loop through interface, Plug and play (DDC1, DDC2b, RGB3: DDC2b only),

Split screen operations

Accessories Remote control with two AAA batteries, Power cord, Manuals, Safety metal fittings,

Ferrite cores, Bands, Cable clamps

Regulations Meets EMC Directive

(EN55022 Class A, EN55024, EN61000-3-2,

EN61000-3-3)

Meets Low Voltage Directive

(EN60950-1, IEC60950-1, SEMKO Approved)

Meets AS/NZS CISPR 22:2002 Class A

E-1 4-2