Furuno DS-80 manual Demonstration Mode, System menu

1.7.7 System menu 2

The System Menu 2 contains the diagnostic test and selection of dimmer control and display language.

1.Press the [MENU] key to open the menu.

2.Select SYSTEM MENU 2 and press the [ENT] key.

SYSTEM MENU2

TEST

DIMMER INTERNAL

/LANG. ENGLISH

ENT: SET

TEST: Checks the equipment for proper operation. For further details see Chapter 3.

DIMMER: See paragraph 1.3.2.

LANG.: Selects the language to use in menus, English or Japanese.

1.8Demonstration Mode

The demonstration mode outputs the Doppler speed signal to external equipment. This checks if the signal is being correctly output. )

1.Press the [MENU] key to open the menu.

2.Select DEMO and press the [ENT] key.

DEMO

SPEED

+10 . 0 kt

DATA DISPLAY	OFF
	ENT: SET

3. Select SPEED and press the [ENT] key.

4.Select the digit to change with or .

5.Use or to set. (The setting range is

-10.0 to +40.0 kt, and the default setting is +10.0 kt.)

6.Press the [ENT] key.

7.Press the [ENT] key to open the DATA DISPLAY menu.

DEMO
SPEED
+10 . 0 kt
DATA DISPLAY	OFF
	ON
	OFF
	ENT: SET

8.Press to select ON and press the [ENT] key.

9.Press the [MENU] key twice to close the menu.

The indication “DEMO” appears at the top right-hand corner when the demo mode is on. To turn off the demonstration display, show the DEMO menu and set SPD to OFF.

SPEED	DEMO	Demonstration
	10.0 kt	mode "ON"

DISTANCE

11