SAFETY INSTRUCTIONS
WARNING
ELECTRICAL SHOCK HAZARD
Do not open the equipment.
Only qualified personnel should work inside the equipment.
Immediately turn off the power at the switchboard if water leaks into the equipment or an object is dropped into the equipment.
Continued use of the equipment can cause fire or electrical shock. Contact a FURUNO agent for service.
Do not place
Fire or electrical shock can result if the liquid spills into the equipment.
Do not disassemble or modify the equipment.
Fire, electrical shock or serious injury can result.
Keep the equipment away from rain and water splash.
Fire or electrical shock can result if the rain or water gets into the equipment.
Do not operate the equipment with wet hands.
Electrical shock can result.
Keep heater away from equipment.
A heater can melt the equipment's power cord, which can cause fire or electrical shock.
Use the proper fuse.
Fuse rating is shown on the equipment. Use of a wrong fuse can result in damage to the equipment.
CAUTION
Do not use the equipment for other than its intended purpose.
Improper use of the equipment can result in personal injury or equipment damage.
Turn off the equipment immediately if you feel it is abnormal.
Turn off the power from the switchboard if the equipment is emitting strange noises or becomes excessively hot. Contact your dealer for advice.
The useable ambient temperature range is 15C to 55C.
Do not use the equipment out of the above temperature range.
Do not place objects around the equipment.
Overheating may result.
Do not power the equipment when the transducer is in air.
The transducer may become damaged.
Handle all units carefully.
Damage can lead to corrosion.
Do not use chemical cleaners such as alcohol, acetone and benzine to clean the equipment.
Chemical cleaners can remove paint and markings. Use only a soft, dry cloth. For stubborn dirt, use a soft cloth moistened with
When dry docked remove marine life from the transducer.
Remove marine life to maintain good sensitivity.
Do not paint the transducer face. Further, handle the transducer with care.
Paint will affect equipment performance.
i