Garmin 255A manual Editing a Com User Frequency, Frequencies. Press ENT

2.Press the ENT key to confirm deletion of the displayed frequency.

3.2.2.3Editing a Com User Frequency

1.Press FUNC.Turn the LARGE knob to reach the Com functions and then turn the SMALL knob to select the Com User

Frequencies. Press ENT.

Select User Freqs

Figure 3-5 Com User Frequency Function

2.Press the CRSR (SMALL knob) to start editing the Com User frequency. Turn the SMALL knob to select the MHz values and turn the LARGE knob to move the cursor and then the SMALL knob to select kHz values.

Select User Freq Value

Figure 3-6 Com User Frequency Value Selection

3.Turn the LARGE knob to select the Wpt Name.Turn the SMALL knob to select characters and turn the LARGE knob to move the cursor.

Select User Wpt Name

Figure 3-7 Com User Frequency Name Selection

4.After selecting the desired characters, press ENT.

5.Turn the LARGE knob to select the Waypoint Type field.

6.Turn the SMALL knob to select the Waypoint Type.

Select Wpt Type

Figure 3-8 Com User Frequency Type Selection

7.After selecting the Waypoint Type, press ENT to accept changes to the User Frequency.

3-4 Garmin GNC 255A/255B Pilot’s Guide 190-01182-01 Rev. A