Garmin 255A Remote com, Been in pressed, All installations, This input will now, Installations

Page 58

Message

Description

Action

REMOTE KEY	The remote com	Verify the COM RMT XFR key/
STUCK -	transfer (COM RMT	switch is not stuck. Contact dealer
Com remote	XFR) key/switch has	for service if this message persists.
transfer key is	been in pressed
stuck.	position for at least 30
	seconds. This input will
	now be ignored. This
	input is not available in
	all installations.
REMOTE KEY	The remote com	Verify the COM CHAN UP key/
STUCK -	frequency increment	switch is not stuck. Contact dealer
Com remote	(COM CHAN UP) key/	for service if this message persists.
frequency	switch has been in
increment key is	pressed position for
stuck.	at least 30 seconds.
	This input will now
	be ignored. This input
	is not available in all
	installations.
REMOTE KEY	The remote com	Verify the COM CHAN DN key/
STUCK -	frequency decrement	switch is not stuck. Contact dealer
Com remote	(COM CHAN DN) key/	for service if this message persists.
frequency	switch has been in
decrement key is	pressed position for
stuck.	at least 30 seconds.
	This input will now
	be ignored. This input
	is not available in all
	installations.

4-6

Garmin GNC 255A/255B Pilot’s Guide

190-01182-01 Rev. A

Image 58

Contents GNC 255A/255B November Limited Warranty 190-01182-01 Rev. a Iii Operation Product Registration and Support US Toll Free Canada Toll FreeRecord of Revisions Contents 2.2 2.12.3 Index Index-1 This page intentionally left blank Getting Started Product DescriptionNav Volume/ID Knob Power/Com Volume/Squelch KnobPilot Controls 5 C/N Com/Nav Key Tuning LARGE/SMALL Concentric Cursor KnobsFLIP/FLOP Key OBS KeyFunc Function Key USB PortMON Monitor Key Com Radio Power OnSelecting a Com Frequency Saving a Com Channel Monitoring the Standby Com ChannelAfter selecting the desired characters, press ENT Description After making a selection, press ENTCom Database Look-Up Frequency Database Reverse Look-UpStuck Mic Emergency ChannelRemote Frequency Selection Control Selecting a Nav Frequency Nav RadioSaving a Nav Channel Listening to the Nav Audio Channel 01-36OBS Mode 14 CDI DisplayDistance/Speed/Time DST Display 15 DST Data DisplayThis page intentionally left blank Functions Functions DescriptionRecent Com Frequencies Com FrequenciesTurn the Small knob to select an Entry Com User Frequencies Press the CLR key to delete this User frequencyEditing a Com User Frequency Frequencies. Press ENTCom Database Frequencies Com Database FrequenciesCom Nearest Airports APT Nearest APT function. Then, press ENTCom Nearest Area Control Center ACC Frequencies Turn Small Knob To Scroll Through Available FrequenciesCom Nearest Flight Service Station FSS Frequencies 13 Com Nearest FSS FrequenciesCom Nearest Weather WX Frequencies 14 Com Nearest Weather FrequenciesNav Frequencies Recent Nav FrequenciesNav User Frequencies Press the ENT key to delete the displayed frequencyEditing a Nav User Frequency Nav Database Frequencies 21 Nav Database FrequenciesWhen duplicate identifiers are found, press ENT Nav Nearest VORTurn the Small knob to display the available VORs ICS ConfigurationAdjust Intercom Functions displayAux Audio Turn the Small knob to turn the Aux Audio On or OffIntercom On/Off function. Then, press the ENT key Intercom On/OffSpeaker On/Off Speaker On/Off function. Then, press ENTSystem Configuration Com SpacingDisplay Brightness 34 Set Display BrightnessDisplay Contrast function. Then, press the ENT key Display ContrastDatabase Info Database Version function. Then, press the ENT keyLoad Database Load Database function. Then, press the ENT keySoftware Version function. Then, press the ENT key Software VersionSerial Number Press the Func key to return to the main menuSetting Up the Count Down Timer TimersTo select a starting timer value Pressing CLR and then ENT will reset the displayed Timer Setting Up the Count Up TimerViewing Timers in the Com Display Pressing ENT twice will stop the displayed Timer48 Count Down Timer Value Now Counting Up This page intentionally left blank Troubleshooting AppendixIf in Lock Out mode It can be enabledOr disabled via a Remote mounted Calibration error Recalibrate resolverUpdating the Frequency Database Messages Verify glideslope deviation Power has been Re-apply power to the unitSwitch has been Property withRemote com All installationsInstallations Been in pressedNot communicating Nav radio is Contact dealer for serviceProperty with System This page intentionally left blank Index Remote frequency control 2-5 Reverse look-up 2-4 Revisions