Garmin 255A manual Editing a Nav User Frequency

3.3.2.3Editing a Nav User Frequency

1.Press FUNC.Turn the LARGE knob to reach the Nav functions and then turn the SMALL knob to select the Nav User

Frequencies. Press ENT.

Figure 3-18 Nav User Frequency Function

2.Turn the SMALL knob to select the desired Nav User frequency and then press ENT. Press the Cursor knob to enable editing. The frequency MHz value will be selected. Turn the SMALL knob to select the MHz frequency value.Turn the LARGE knob to move the cursor and then turn the SMALL knob to select the kHz frequency value.

3.Turn the LARGE knob to select the WPT name.Turn the SMALL knob to select characters and turn the LARGE knob to move the cursor.

Figure 3-19 Nav User Frequency Name Selection

4. After selecting the desired characters, press ENT.

5.Turn the LARGE knob to select the waypoint Type.

6.Turn the SMALL knob to select characters and Turn the LARGE knob to move the cursor.

Figure 3-20 Nav User Frequency Type Selection

7. After selecting the desired characters, press ENT.

3-12 Garmin GNC 255A/255B Pilot’s Guide 190-01182-01 Rev. A