Garmin 255A manual Com Database Frequencies

3.2.3Com Database Frequencies

The GNC 255 contains a large database of Com frequencies that may be recalled by identifier.

Turn SMALL Knob

To Select Character

Turn LARGE Knob

To Move Cursor

Figure 3-9 Com Database Frequencies

1.Press FUNC to access the Functions. With the Com Frequency Function highlighted, turn the SMALL knob to view the Com

Database function. Then, press ENT.

2.Turn the SMALL knob to select the desired character.

3.Turn the LARGE knob to move the cursor to highlight a character.

4.Repeat steps 2 and 3 to complete the desired identifier and then press the ENT key.

5.If available, the Frequency Type will be highlighted. Turn the SMALL knob to select the desired frequency.

Press ENT Key To Set

Selected Freq As Standby

				Selected Frequency
			Turn SMALL Knob
Press FLIP/FLOP Key To Set	Selected	Identifier	To Select Freq Type
Selected Freq As Active

Figure 3-10 Selected Com Database Frequency

6.Press and release the FLIP/FLOP key to set the selected frequency as the Active frequency.

7.Press the ENT key to set the selected frequency as the Standby frequency.

190-01182-01 Rev. A Garmin GNC 255A/255B Pilot’s Guide 3-5