Fluke 199, 196, 192 user manual Making Automatic Scope Measurements, Select the Peak-Peak

Using The Scope	1
Making Automatic Scope Measurements

Making Automatic Scope Measurements

The test tool offers a wide range of automatic scope measurements. You can display two numeric readings: READING 1 and READING 2. These readings are selectable independently, and the measurements can be done on the input A or input B waveform

To choose a frequency measurement for input A, do the following:

1 Display the SCOPE key labels.

2 Open the Reading 1 menu.

3	Select on A. Observe that the
	highlight jumps to the present
	measurement.
4	Select the Hz measurement.

Observe that the top left of the screen displays the Hz measurement. (See Figure 8.)

To choose also a Peak-Peakmeasurement for Input B as second reading, do the following:

1 Display the SCOPE key labels.

2 Open the Reading 2 menu.

3	Select on B. The highlight jumps
	to the measurements field.
4	Open the PEAK menu.

5	Select the Peak-Peak
	measurement.

13