EMC 300-000-978 REV A03 You are prompted to confirm the major number, Enter y and press Enter

1

Installing PowerPath

8.You are prompted for a major number that can be assigned to the PowerPath device driver (emcp) on every host in the cluster:

Assign major number for the device driver [?]:

Enter a major number and press ENTER. You must specify a major number that is not used by any host in the cluster.

The installation will assign this major number to the PowerPath driver. Specify this major number during PowerPath installation on every other host in the cluster.

9. You are prompted to confirm the major number:

Major major will be assigned to the device driver [y,n,q,?] (default: y):

Press ENTER to confirm the major number.

If you have already installed PowerPath 4.0 on the host and are now reinstalling the PowerPath 4.0 software, you see the following prompt:

Configuration for PowerPath 4.0 exists - want to upgrade [y,n,q,?] (default: y):

Press ENTER to preserve your PowerPath configuration.

Enter n and press ENTER to overwrite your PowerPath configuration.

10.You see the following prompt:

This package contains scripts which will be executed with super-user permission during the process of installing this package.

Do you want to continue with the installation of <EMCpower> [y,n,?]

Enter y and press ENTER.

1-8 PowerPath for UNIX Installation and Administration Guide