EMC 300-000-978 REV A03 manual Upgrading From PowerPath 3.0.x or, Enter 1 and press Enter

Installing PowerPath

Upgrading From PowerPath 3.0.x or 2.1

Mount the CD-ROM1. Log in as root.

2.Insert the CD-ROM into the CD-ROM drive.

If the CD mounts automatically, continue with Install the Software, which follows.

If the CD does not mount automatically, you must mount it manually. Continue with step 3.

3.Mount the CD on your file system. For example, to mount the CD on /cdrom/cdrom0, enter:

mount -F hsfs -r /dev/dsk/cxtydzs0 /cdrom/cdrom0

where x, y, and z are values specific to the host’s CD-ROM drive. For example:

mount -F hsfs -r /dev/dsk/c0t2d0s0 /cdrom/cdrom0

Install the Software 1. If you do not have a graphics terminal, run the script filename command to record pkgadd output in the specified file. (After pkgadd completes, use CTRL-Dto stop recording the output.)

2.Change to the /mount_point/UNIX/SOLARIS directory. For example, enter:

cd /cdrom/cdrom0/UNIX/SOLARIS

3.Start the installation program. Enter:

/usr/sbin/pkgadd -d .

4.You see the following prompt:

The following packages are available:

1	EMCpower	EMC	PowerPath
		(all) 4.0.0_bxxx
2	EMCvg	EMC	Enterprise Cluster PowerPath Volume
		Manager VCS Agent

(sparc) 1.0

Select package(s) you wish to process (or 'all' to process all packages). (default: all) [?,??,q]:

Enter 1 and press ENTER.

Upgrading to PowerPath 4.0 1-11

1