Connecting the Power Terminal

Solderless Terminal Connections

• Do not connect a cord having an exposed core

wire to the power terminals of this amplifier

(Power terminal, GND terminal, System remote

control terminal). Disconnection or breakage of

the core wire can cause a fire or short-circuit.

• Since the wire will become loose over time, it

must be periodically inspected and tightened as

necessary.

• Do not solder or bind the ends of the twisted

wires.

• Fasten while making sure to not to clamp the

insulating sheath of the wire.

1.Pass the battery wire from the engine compartment to the interior of the vehicle.

•After making all other connections to the amplifier, connect the battery wire terminal of the amplifier to the positive (+) terminal of the battery.

Positive (+)	Engine	Interior of
	compartment
		the vehicle
terminal

ENGLISH ESPAÑOL

• Use the supplied hexagonal wrench to tighten and

loosen the terminal screw of the amplifier.

Securely fasten the wire with the terminal screw.

However, since excessively tightening the termi-

nal screw of the System remote control has the

risk of damaging the wire, be careful not to tight-

en excessively by observing the status of the wire

when tightening.

Fuse (40 A) ⋅ 2

Insert the O-ring rubber grommet into the vehicle body.

Drill a 13 mm hole into the vehicle body.

DEUTSCH

•We recommend that you use the special red bat- tery and ground wire [RD-228], which is sold separately. Connect the battery wire directly to the car battery positive terminal (+) and the ground wire to the car body.

•Recommended wires size (AWG: American Wire Gauge) is as follows. The battery wire and the ground wire must be same size.

•Use a 10 AWG to 20 AWG wire for the system remote control wire.

Battery Wire and Ground Wire Size

Wire Length	less than	less than	less than
	4.5 m	7.2 m	11.4 m
	(14 ft. 9 in.)	(23 ft. 7 in.)	(37 ft. 5 in.)
Wire Size	8 AWG	6 AWG	4 AWG

2.Connect the wires to the terminal.

•Fix the wires securely with the terminal screws.

System remote	Terminal screws
control terminal
	GND terminal
Power terminal
	Ground wire

Battery wire

System remote control wire

WARNING

Failure to securely fasten the battery wire to the ter- minal using the terminal screws could cause the ter- minal area to overheat and could result in damage and injury including minor burns.

FRANÇAIS ITALIANO NEDERLANDS êìëëäàâ

PRS-D4200F specifications

The Pioneer PRS-D4200F is an advanced 4-channel amplifier designed for car audio enthusiasts who seek high-quality sound and robust performance. Known for its compact yet powerful design, the PRS-D4200F is engineered to enhance the audio experience in any vehicle.

One of the standout features of the PRS-D4200F is its impressive power output. With a maximum output of 1,600 watts, this amplifier ensures that your audio system can produce loud, clear sound without distortion, even at higher volume levels. The RMS power rating of 50 watts per channel at 4 ohms and 100 watts per channel at 2 ohms allows for great flexibility when matching it with various speaker systems.

The PRS-D4200F utilizes Class D amplification technology, which is designed for high efficiency. This means that the amplifier produces less heat compared to traditional Class A/B amps, allowing it to deliver more power without the risk of overheating, making it ideal for long listening sessions on the road.

The amplifier features a low-pass filter and high-pass filter, providing users with the ability to tailor the sound to their preference easily. This adjustability ensures that users can optimize their audio for different speaker setups, whether they are focusing on throaty bass or crystal-clear highs. Additionally, the inclusion of a bass boost feature allows for enhanced low-frequency performance, providing an extra punch to bass-heavy music.

Pioneer has equipped the PRS-D4200F with a durable construction, ensuring that it can withstand the rigors of vehicle installation. The compact design allows it to fit into tighter spaces, making it easier to integrate into different car models without sacrificing performance. The amplifier’s sleek look also adds a modern touch to any audio setup.

Another key feature of the PRS-D4200F is its protection circuitry. This technology helps prevent damage due to short circuits, overheating, and other issues, ensuring long-lasting reliability. The amplifier also includes a low-impedance capability, which means it can work with a wider variety of speakers, further enhancing its versatility.

In conclusion, the Pioneer PRS-D4200F stands out as an excellent choice for those looking to upgrade their vehicle’s audio system. With its powerful output, efficient design, and customizable sound options, it meets the needs of both casual listeners and serious audiophiles alike. Whether you are an urban commuter or a road trip enthusiast, the PRS-D4200F is engineered to elevate your audio experience.