Pioneer PRS-D4200F owner manual English Español Deutsch Français Italiano Nederlands êìëëäàâ

Page 5

WARNING

•Handling the cord on this product or cords associ- ated with accessories sold with the product will expose you to lead, a chemical known to the State of California and other governmental entities to cause cancer and birth defects or other reproduc- tive harm. Wash hands after handling.

•We recommend that you use the special red bat- tery and ground wire [RD-228], which is sold sep- arately. Connect the battery wire directly to the car battery positive terminal (+) and the ground wire to the car body.

•Do not touch the amplifier with wet hands. Otherwise you may get an electric shock. Also, do not touch the amplifier when it is wet.

•For traffic safety and to maintain safe driving conditions, keep the volume low enough so that you can still hear normal traffic sound.

•Check the connections of the power supply and speakers if the fuse of the separately sold battery wire or the amplifier fuse blows. Detect the cause and solve the problem, then replace the fuse with another one of the same size and rating.

•To prevent malfunction of the amplifier and speakers, the protective circuit will cut the power supply to the amplifier (sound will stop) when an abnormal condition occurs. In such a case, switch the power to the system OFF and check the connection of the power supply and speakers. Detect the cause and solve the problem.

•Contact the dealer if you cannot detect the cause.

•To prevent an electric shock or short-circuit during connection and installation, be sure to disconnect the negative (–) terminal of the battery beforehand.

•Confirm that no parts are behind the panel when drilling a hole for installation of the amplifier. Be sure to protect all cables and important equipment such as fuel lines, brake lines and the electrical wiring from damage.

•DO NOT allow amplifier to come into contact with liquids due to, for example, the location where the amplifier is installed. Electrical shock could result. Also, amplifier and speaker damage, smoke, and overheating could result from contact with liquids. In addition, the amplifier surface and the surface of any attached speakers could become hot to the touch and minor burns could result.

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS êìëëäàâ

4

Page 4 Page 6
Image 5
Page 4 Page 6
Contents PRS-D4200F Contents After-sales service for Pioneer products Before Using This ProductInformation to User S.AVisit us at the following site Visit our websiteEnglish Español Deutsch Français Italiano Nederlands êìëëäàâ Power Indicator Setting the UnitBFC Beat Frequency Control Switch Cut Off Frequency ControlInput Select Switch LPF Low-Pass Filter/HPF High-Pass Filter Select SwitchInput Switch Gain ControlGain Control of This Unit Setting the Gain properlySignal waveform when outputting at high To prevent damage and/or injury Connecting the UnitSpeaker Channel Speaker Type Power RCA input jack a Fuse 30 a ⋅ Speaker output terminal Connection DiagramBattery Wire and Ground Wire Size Connecting the Power TerminalConnections when using the speaker input Connecting the Speaker Output TerminalsUsing the Speaker Input Three-channel Connecting the Speakers and Input WiresFour-channel Two-channel Mono Two-channel StereoTo prevent malfunction and/or injury InstallationReplacing the top cover Example of installation on the floor mat or on the chassisAverage current drawn SpecificationsTable des matières Interrupteur BFC Commande de fréquenceSélecteur LPF Filtre passe-bas Raccordement des bornes de sortie versAvant d’utiliser cet appareil Service après-vente pour un produit PioneerEtats-Unis CanadaVisitez notre site Web PrécautionPage Réglage de l’appareil Commande de la fréquence de coupureTémoin d’alimentation Couvercle supérieurSélecteur LPF Filtre passe-bas/HPF Filtre passe-haut Commande du gainCommutateur de sélection d’entrée Sélecteur d’entréeRéglage correct du gain Commande du gain de cet appareilVoie de sortie Type de haut-parleur Puissance Raccordement de l’appareilPour éviter toute anomalie ou blessure Schéma de raccordement Section de câble de la batterie et câble de masse Raccordement de la borne d’alimentationRaccordement des bornes de sortie vers les haut-parleurs Utilisation de l’entrée de haut-parleurConnexion lors de l’utilisation de l’entrée de haut-parleur RemarqueTrois voies Raccordement des haut-parleurs et des câblesQuatre voies Deux voies mono Deux voies stéréoPour éviter toute anomalie de fonctionnement ou blessure ’installez pas l’appareilRemise en place du couvercle supérieur Exemple d’installation sur le tapis de sol ou sur le châssisConsommation moyenne de courant Caractéristiques techniquesEjemplo de instalación en la alfombra del ContenidoConexión de los altavoces y cables EE.UU Antes de usar este productoServicio posventa para productos Pioneer Visite nuestro sitio Web PrecaucionAdvertencia Cubierta superior Ajuste de esta unidadControl de frecuencia de corte Interruptor BFC Control de la frecuencia de batidoInterruptor de entrada Control de gananciaInterruptor de selección de entrada Control de ganancia de esta unidad Configuración apropiada de la gananciaTipo de altavoz Alimentación Conexión de la unidadPara evitar daños y/o lesiones Salida externa Diagrama de conexiónDe entrada RCA B Fusible 30 a ⋅Tamaño del cable de batería y cable de puesta a tierra Conexiones de terminales sin soldaduraConexión del terminal de alimentación Uso de la entrada de altavoz Conexión del terminal de salida de altavozConexiones cuando se utiliza la entrada de altavoz NotaCuatro canales Conexión de los altavoces y cables de entradaTres canales Toma de conector De entrada RCA BDesde el sistema estereofónico del coche salida RCA Dos canales estéreoDos canales mono Para evitar fallas de funcionamiento y/o lesiones InstalaciónApriete el tornillo con una llave hexagonal de 4 mm Recolocación de la cubierta superiorConsumo de corriente promedio EspecificacionesÅ„ÛÓ 1-óÓÏÂ, å„ÛÓ-ÍÛ, íÓÍËÓ 153-8654, üÔÓÌËfl ÄÓÔÓ‡ˆËfl è‡ÈÓÌË

PRS-D4200F specifications

The Pioneer PRS-D4200F is an advanced 4-channel amplifier designed for car audio enthusiasts who seek high-quality sound and robust performance. Known for its compact yet powerful design, the PRS-D4200F is engineered to enhance the audio experience in any vehicle.

One of the standout features of the PRS-D4200F is its impressive power output. With a maximum output of 1,600 watts, this amplifier ensures that your audio system can produce loud, clear sound without distortion, even at higher volume levels. The RMS power rating of 50 watts per channel at 4 ohms and 100 watts per channel at 2 ohms allows for great flexibility when matching it with various speaker systems.

The PRS-D4200F utilizes Class D amplification technology, which is designed for high efficiency. This means that the amplifier produces less heat compared to traditional Class A/B amps, allowing it to deliver more power without the risk of overheating, making it ideal for long listening sessions on the road.

The amplifier features a low-pass filter and high-pass filter, providing users with the ability to tailor the sound to their preference easily. This adjustability ensures that users can optimize their audio for different speaker setups, whether they are focusing on throaty bass or crystal-clear highs. Additionally, the inclusion of a bass boost feature allows for enhanced low-frequency performance, providing an extra punch to bass-heavy music.

Pioneer has equipped the PRS-D4200F with a durable construction, ensuring that it can withstand the rigors of vehicle installation. The compact design allows it to fit into tighter spaces, making it easier to integrate into different car models without sacrificing performance. The amplifier’s sleek look also adds a modern touch to any audio setup.

Another key feature of the PRS-D4200F is its protection circuitry. This technology helps prevent damage due to short circuits, overheating, and other issues, ensuring long-lasting reliability. The amplifier also includes a low-impedance capability, which means it can work with a wider variety of speakers, further enhancing its versatility.

In conclusion, the Pioneer PRS-D4200F stands out as an excellent choice for those looking to upgrade their vehicle’s audio system. With its powerful output, efficient design, and customizable sound options, it meets the needs of both casual listeners and serious audiophiles alike. Whether you are an urban commuter or a road trip enthusiast, the PRS-D4200F is engineered to elevate your audio experience.
Top Page Image Contents