AT&T MLS-12TM, MLS-12DTM, MLS-6TM Rotary Dialing Time out Outside Conference, Code #108, Code #109

Rotary Dialing

Time out

Outside Conference

Code: #108

Description: If you have any rotary lines and are having trouble calling out on standard touch-tone phones, use this procedure to change the length of the Rotary Dialing Timeout. For example, if users dial slowly and calls are not com- pleted or are connected to wrong numbers, lengthen the timeout. Do not change this setting unless the system is experiencing problems.

Valid Entries: 1 = 4 seconds

✓2 = 8 seconds

3 = 12 seconds

Considerations: Use this procedure only if the Dial Mode (#201) for at least one outside line in the system is set to rotary.

Programming Steps:

1.Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 1 ] [ 0 ] [ 8 ] . The display reads:

Rotary Timeout

28-secs

2.Change the Rotary Dialing Timeout by entering the setting number as listed above. For example, to lengthen the Rotary Dialing Timeout to 12 seconds, press [3] . The display reads:

Rotary Timeout

3 12-sees

Code: #109

Description: Prevents everyone on the system from including outside parties in conference calls.

Valid Entries: ✓ 1 = Allow conference calls with outside parties 2 = Deny conference calls with outside parties

Programming Steps:

1.Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 1 ] [ 0 ] [ 9 ] . The display reads:

Outside Conf

1Allowed

2.To deny conference calls with outside parties, press [ Next Data ] . The display reads:

Outside Conf

2 Disallowed

3-8 System Programming