AT&T MLS-12DTM, MLS-12TM, MLS-6TM manual Music On Hold, Code #602, Valid Entries 1 = Active

Music On Hold	Code: #602
	Description: Activates or deactivates the Music-on-Hold jack on the processor
	module. To provide music or taped messages to callers on hold, the Music-on-
	Hold jack must be active and an audio source attached to the jack.
	Valid Entries: ✓ 1 = Active
	2 = Not active
	Considerations:
	If no audio source is attached to the system, we recommend changing the
	setting to “notactive.”
	If the audio source develops trouble (such as a bad tape), you can quickly
	turn it off by setting the jack to “not active” until you are able to solve the
	problem.
	Users of equipment that rebroadcasts copyrighted music or other material
	may be required to obtain a license from a third party such as ASCAP or
	BMI.

Programming Steps:

1. Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 6 ] [ 0 ] [ 2 ]. The display reads:

Music On Hold

1Active

2.To deactivate the music-on-hold jack, press [ Next Data ] until the display reads:

Music On Hold

2 Not Active

✓ = Factory Setting

To go to the next procedure: [Next Proc ]	To go to a specific procedure: [ # ] [ x ] [ x ] [ x ] [ x ]. The
To go to the previous procedure: [Prev Proc ]	(where XXX is the procedure number)
To return data to the factory setting: [Remove ]	To exit system programming: [Feature ] [	0 ] [ 0 ]

3-30 System Programming