8 | digit keys for direct |
| channel / track selection. |
9 | switches the selected |
| device on / off. |
Note
For some TV brands / types, this key will only turn off the TV.You will have to press a digit button (direct channel selection) to turn on the TV again.
Service and support English
3.2Resetting a key to its original function
If an improved key (see chapter 2.3.2) still does not function as expected, you can always reset the key to its original function.
1 | In the current | 5 sec. |
| ||
| device mode, keep |
| |||
| digit keys | and |
|
| |
| pressed |
|
|
| |
| simultaneously for |
| |||
| 5 seconds, until the |
| |||
| red Setup light | lights up. |
| ||
| • The remote control is now in setup | ||||
2 |
| mode. |
|
| |
Press digit keys | , |
| |||
|
| , and | , in that |
| |
| order. |
|
|
| |
| • | After each key |
| ||
|
| press the device |
| ||
|
| selection key |
|
| |
3 |
| blinks once. |
|
| |
Press the key that |
| ||||
| you wish to reset |
| |||
| twice. E.g. the 22 |
| |||
| key. |
|
| 2 x | |
| • | After each key | |||
press the device 
selection key blinks once.
•The device selection key will blink one more time to confirm that the key was succesfully reset to its original function.
EN 11
04_27__Manual_80_210.indd 11 |