Philips SRP4004/27 manual Keys and functions, Is in setup mode, Etc, Operated, Being sent

4Press and hold the key that does not function and immediately release it when

the device responds.

• If the key still does not function as expected, try pressing it again for a longer period of time.

5 Press the

device selection key
twice to save your
settings and exit	2 x
setup mode.

• When no key

is pressed for 5 minutes or more, the remote control will exit setup mode, automatically saving all your settings.

3Using the universal remote control

Using the universal remote control English

3.1Keys and functions

The illustration on page 2 gives an overview of all keys on the remote control.Try out the keys you need for operating your devices.

Notes

•Keys having the same functions as the keys on your original remote control may have different namings on the SRP4004 (e.g. Info / Display).

•Only functions that are available on your original remote control can be used for operating your devices with the SRP4004.

1	Setup light. Lights up red
	when the remote control
	is in setup mode.
2	selects available source
	inputs (antenna, cable,
	etc.).
3	device selection keys.
	• select the device to be
	operated.
	• light up when a remote
	control command is
	being sent.
	EN	9

04_27__Manual_80_210.indd 9 25-09-09