•Dell_DSET_(Version Number.exe — This invokes the GUI.
•Dell_DSET_(version number).exe ADDLOCAL=<full/collector/provider> INSTALLDIR=<location> /qn — This performs silent installation that does not display any graphical progress bar.
NOTE:
•ADDLOCAL parameter in the command is optional.
•For version 3.2 and later, while upgrading, if ADDLOCAL parameter is not included in the command, then only the installed component is upgraded.
•For version 2.2 or lower, if Dell_DSET_(version number).exe /qn is run, then both DSET application is upgraded.
Where:
full = Full installation of both DSET and Remote Provider on the local system.
collector = Installation of DSET only for remote collection.
provider = Installation of Remote Provider only for remote collection from a remote system.
If DSET application version 3.2 or later is currently installed in the system, use the following options to upgrade to version 3.7.0:
Table 3. : Upgrading scenarios from DSET application version 3.2 or later to version 3.7.0
| DSET and Remote | DSET | Remote Provider |
| Provider |
|
|
|
|
|
|
DSET and Remote | Yes | Yes | Yes |
Provider |
|
|
|
DSET | Yes | Yes | Yes |
Remote Provider | Yes | Yes | Yes |
15