MANUAL TIME SETTING:
You then may manually set the time by following the steps below:
Minutes Flashing
Hour Flashing
1.The hour digit will flash.
2.Use the + or MIN/MAX key to set the hour.
3.Press the SET key to switch to the minutes. The minute digit will flash.
4.Use the + or MIN/MAX key to set the minutes (holding of the key will forward the digit by 5).
5.Confirm the time with the SET key and enter the
12/24 HOUR TIME DISPLAY SETTING:
Digit flashing
The time can be set to view as
1.Use the + or MIN/MAX key to toggle the value.
2.Confirm with the SET key and enter the CALENDAR SETTING.
CALENDAR SETTING:
"Month. Date." (for 12h time display) "Date. Month." (for 24h time display)
Year
The date default of the Weather Station is 1. 1. of year 2009. The date can be set manually by proceeding as follows.
1.The year digit will flash.
2.Use the + or MIN/MAX key to set the year (pressing and holding the key will forward the digit by 5). The range runs from "00" (2000) to "99" (2099).
3.Press the SET key to confirm the year and enter the month setting. The month digit will flash.
4.Use the + or MIN/MAX key to set the month.
5.Press the SET key to confirm the month and enter the date setting mode. The date digit will flash.
6.Use the + or MIN/MAX key to set the date.
7.Confirm all calendar settings with the SET key and enter the °C/°F TEMPERATURE UNIT SETTING.
°C/°F TEMPERATURE UNIT SETTING
Flashing
The temperature display can be selected to show temperature data in °F or °C. (Default °F)
1.The temperature unit is flashing
2.Use the + or MIN/MAX key to toggle between “°F” or “°C”.
3.Confirm with the SET key and enter the WIND SPEED UNIT SETTING
WIND SPEED UNIT SETTING
Flashing
8