Marantz CC4003, 541110307024M manual Remote Control Code Setting, Advanced Operations, English

ENGLISH

NAMESAND FUNCTIONS

ADVANCED OPERATIONS

REMOTE CONTROL CODE SETTING

REMOTE CONTROL UNIT SETTING CC4003 SETTING

DISPLAY EXAMPLES

CONNECTIONS	BASIC
OPERATIONS	BASIC
CONNECTIONS	ADVANCED
OPERATIONS	ADVANCED
TROUBLESHOOTING
OTHERS

•The unit and remote controller have five sets of built-in remote control codes for each. These codes enable up to five CC4003s installed in the same place to be controlled independently.

•To use multiple units at the same time, set the second, third, forth, and fifth CC4003s and their remote controller’ remote control codes.

•To set the codes, follow the procedure below to control only selected unit is remotely controlled.

•At the factory, the unit and remote controller were set to CODE1.

1 - 5

RECALL

• To set CODE2

Press RECALL button and Numerical button 2 on the remote controller at a time for five seconds or more.

• To set CODE3

Press RECALL button and Numerical button 3 on the remote controller at a time for five seconds or more.

• To set CODE4

Press RECALL button and Numerical button 4 on the remote controller at a time for five seconds or more.

• To set CODE5

Press RECALL button and Numerical button 5 on the remote controller at a time for five seconds or more.

Caution

To reset the remote control to CODE1, press RECALL button and Numerical button 1 on the remote controller at the same time for five seconds or more.

RECALL

PROGRAM

•To synchronize the remote control code of a CC4003 with the corresponding remote controller, simultaneously press the PROGRAM and RECALL buttons on the remote controller.

•The remote control code set is displayed on the display window on the unit for five seconds, and the setting is completed.

•When the remote controller is set to CODE1

•When the remote controller is set to CODE2

•When the remote controller is set to CODE3

•When the remote controller is set to CODE4

•When the remote controller is set to CODE5

12