FUNCTIONS | NAMES AND |
CONNECTIONS | BASIC |
ENGLISH
NAMES AND FUNCTIONS | BASIC CONNECTIONS | |||
REAR PANEL |
| CONNECTING TO AN AMPLIFIER | ||
REMOTE CONTROL | ANALOG OUT DIGITAL OUT | FLASHER IN |
| ANALOG OUT DIGITAL OUT FLASHER IN |
|
| REMOTE CONTROL | ||
IN | L |
| IN | L |
|
|
| ||
EXTERNAL INTERNAL |
| EXTERNAL INTERNAL |
| |
OUT | R | AC IN | OUT | R |
| COAXIAL OPTICAL |
|
| COAXIAL OPTICAL |
MODEL NO. CC4003
CONNECTING THE POWER
SUPPLY
1. Plug the power cord into AC IN jack on the rear panel.
AC IN
OPERATIONS | BASIC |
CONNECTIONS | ADVANCED |
OPERATIONS | ADVANCED |
TROUBLESHOOTING | |
OTHERS | |
q w e r t y u
qEXTERNAL/INTERNAL switch
The switch is set to INTERNAL, when first purchased, enabling the unit’s
Before using the supplied connecting cable to make the connection between the unit and the remote control connectors on a Marantz equipment, set the switch to EXTERNAL.
Note
Signals cannot be received from the remote controller if the switch is kept at EXTERNAL when the unit is to be used on its own.
w
A control port for professionals (custom installers).
eREMOTE CONTROL IN and OUT connectors
Using the supplied remote control connecting cable, these connectors enable this unit to be connected to a Marantz component equipped with remote control connectors. These connections make it possible to control an entire system that centers on the amplifier or other such component.
rANALOG OUT connectors
The music signals during play are output from these connectors.
i
tDIGITAL AUDIO OUT COAXIAL connector
The music signals during play are output digitally from this coaxial output connector.
yDIGITAL AUDIO OUT OPTICAL connector
The music signals during play are output digitally from this optical output connector.
uFLASHER IN connector
A control port for professionals (custom installers).
This is used to control the unit from other rooms using keypad, etc.
iPower cord connector socket
Use the supplied power cord to connect to a standard household power supply outlet.
Connect the unit so that the power cord can be removed easily as a precaution against possible accidents.
(Red) 
(White)
Audio connecting cable (supplied)
To the CD input connectors
Amplifier
Notes
•Do not connect this unit and other components to mains power until all connections between components have been completed.
•Insert all plugs and connectors securely. Incomplete connections may make noise.
•Be sure to connect the left and right channels properly.
•Be sure to connect input and output properly.
•Refer to the instructions for each component that is connected to this unit.
•Do not bind audio/video connection cables with power cord and speaker cables this will result in generating a hum or other noise.
•Do not connect the unit to the PHONO input connectors on the amplifier.
2. Plug the power cord into an AC outlet.
3. Turn on the power switch of the audio unit (amplifier, etc.) that is connected with this unit. Set the selector on the connected unit to this unit.
6
