**In normal display mode, user may press the SET key to toggle between Mode1 and Mode 2 display: Mode 1: Wind speed, outdoor temperature, relative air pressure are shown.
Wind speed icon
Outdoor temp icon
Rel. Air Pressure icon
In Mode 1, this reception icon is showing the condition of the reception of the signal from
Mode 2: Wind gust, dew point, and rainfall (optional) reading are shown.
Note: To view the rainfall data, press the + key after entering Mode 2 display.
Dew point icon
MANUAL SETTINGS:
Wind gust icon
Rain icon
In Mode 2, this reception icon is showing the condition of the reception of the signal from Rain sensor (only if a rain sensor is being used).
Note: if no rain sensor is used, the reception icon will always be displayed in Mode 2.
The following manual settings can be changed once the SET key is pressed and held for about 3 seconds:
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
LCD contrast setting Manual time setting 12/24 hour time display Calendar setting
°C/ °F temperature unit setting Wind speed unit
Rainfall unit setting
Air pressure unit setting
Relative pressure reference value setting Weather tendency threshold value Storm warning threshold value
LCD CONTRAST SETTING
Digit flashing
The LCD contrast has 8 levels, from "LCD 1" to "LCD8" (default setting is LCD 5):
1.Press the SET key, the contrast level digit will flash.
2.Use the + or MIN/MAX key to adjust the level of contrast.
3.Confirm with the SET key and enter the MANUAL TIME SETTING.
7