Metrologic Instruments MLPN 2358 manual Quick Start

Page 7

Quick Start

1.) Plug in the scanner. Both LEDs come on together along with the beep-the green LED only flashes.

2.) The scanner is shipped from the factory programmed with default settings.

To configure the MS6720 scanner to meet the host system’s specific needs, refer to the Programming Guide (MLPN 2186) for instructions on how to enter the program mode and to select the appropriate bar codes.

Note: Any time the Load Defaults bar code is scanned the MS6720 is configured for an RS-232 interface. If a RS-232 is not being used, scan at least one other bar code to enable Keyboard Wedge, OCIA, Light Pen or 46xx. Refer to sections B and F in the ScanSelect Programming Guide (MLPN 2186).

3

Image 7

Contents Metrologic INSTRUMENTS, INC USA Corporate Headquarters Europe LocationsTable of Contents Appendix D Appendix aAppendix B Appendix CIntroduction MCA Metrologic Connector Adaptor Mlpn MCA951 Scanner and AccessoriesQuick Start Operational Test Scanner Installation Powered by External Power Supply Scanner Installation Powered by Host Device Manufacturer’s Recommendation Complete Stand Kit Mlpn MS6720 StandGreen and Red LED Scanner PartsRazzberry Tone Audible IndicatorsThree Beeps after power up One BeepFlashing Red and Green and Two Razzberry Tones Three Beeps on power upFailure Modes Flashing Red and One Razzberry ToneNo Red or Green LED Visual IndicatorsLabel Normal Depth of Field Depth of Field SpecificationsShort Depth of Field Extended Depth of Field Optional Depth of Field Normal Depth of Field Short Depth of Field Automatic Turn-On Specifications IR SensorScan Pattern Specifics Omnidirectional Scan VolumeProjection Axis Cross-Sectional Scan Pattern Maintenance All Interfaces All Interfaces Possible CAUSES/SOLUTIONS Keyboard Wedge Only RS-232 only Keyboard Country Type Applications and ProtocolsScanner Version Identifier Communication Protocols Keyboard TypeElectrical Design SpecificationsAppendix a MechanicalEnvironmental OperationalAppendix B Default SettingsDTS/NIXDORF NCR F NCR S ACK/NAK Ocia Version 14 Version 15 Ltpn FuPinction Function Appendix CPin Assignments Cable Pin Assignments for the Coil Cable Version 9 Ocia Version 11 Pin FunctionVersion 14 Version 15 Ltpn Pin Function FuPinction Pin Assignments for the MCA951 DEC9SPin Function Pin Female DINPin Male DIN Pin Male mini-DIN Function Appendix D Warranty and Disclaimer Limited WarrantyDisclaimer Remarque Appendix EAnmerkung Patents Appendix FMCA IndexLtpn System interfaces