Metrologic Instruments MLPN 2358 manual MS6720 Stand, Complete Stand Kit Mlpn

The MS6720 Stand

The stand for the MS6720 is ergonomic and application friendly. The mounting was designed to provide an adequate distance for scanning between the scanner face and the counter top at all times. When fully tilted, the face of the scanner remains a full five inches from the counter. The stand comes preassembled so it can be attached to the work surface with minimum effort (also included is the wall mount clip). The instruc- tions for use of the wall mount clip are included with the general assembly instructions for the stand. Listed below are the component parts of the MS6720 stand kits.

1)Complete Stand Kit: MLPN 45967

Kit includes:

MLPN 45965 (counter top stand) MLPN 45969 (weighted base) MLPN 45978 (wall clip)

10-32 x 3/8" flat head screws #10 x 1" flat head wood screws

2)Counter top Stand Kit:

(for securing directly to a counter top ONLY) MLPN 45965

Kit includes:

each: parts a, b, c, d as shown #10 x 1" flat head wood screws

3) Wall Mount Kit:

(for directly to a wall ONLY) MLPN 45966

Kit includes: part (a) as shown 45978 (wall clip)

#10 x 1" flat head wood screws

8