PREPARATION
INSTALLING/ REMOVING THE BATTERY PACK
The battery pack is not charged at the factory; charge it before use (pages 6 and 7).
Average battery pack life using low power: 12 hours
Average battery pack life using high power: 10 hours
•Average times are calculated using 5% transmit time, 5% receive time, and 90% standby time.
◆Do not short the battery terminals or dispose of the battery by fire.
◆Never attempt to remove the casing from the battery pack.
1Remove the battery cover from
the rear of the transceiver by sliding it back and pulling it away from the transceiver body.
2Install the battery pack as shown
in the diagram. When removing |
|
the battery pack, pull on the |
|
ribbon that is attached to the |
|
pack to dislodge the pack from |
|
the battery compartment. | Ribbon |
3Align the battery cover tabs with
the slots on the transceiver, then firmly slide the cover into place.
4