![](/images/new-backgrounds/1148531/14853127x1.webp)
INSTALLING/ REMOVING THE BELT HOOK
If desired, attach the belt hook to the rear of the transceiver using the 2 supplied screws.
INSTALLING/ REMOVING OPTIONAL ACCESSORIES
Note: Always switch OFF the transceiver power when installing or removing the optional accessories.
The following accessories can be used with this transceiver:
•
•
•
•
1 Open the SP/MIC tabs on the side of the transceiver.
2 Insert the accessory’s plugs into the SP/MIC jacks.
3When you remove the accessory from the transceiver, be sure to cover the SP/MIC jacks with the attached tabs in order to keep dust and dirt away from the contacts.
Note: Refer to the accessory instruction manuals for detailed instructions on each of the accessories.
8