To set up your own calling alert tone:
1Turn the transceiver power OFF.
2 Press and hold the MENU key while turning the transceiver power ON (for 1 second).
3 Press the ▲ or ▼ key to select “ 
”.
4 Press the MENU key to select “
” (calling
alert tone 1) to “
” (calling alert tone 6).
•Each time you press MENU to select a calling alert tone, the new tone sounds.
5 Press the PTT, MON, or CAL key to exit Setting Mode.
INCOMING CALL NOTIFICATION TYPE
Note: To use Incoming Call Notification, you must set up a QT tone or a DQT code (page 11).
Incoming Call Notification is used to inform you of when a call is being received. You can set this function to notify you via a tone or through vibrating. When vibration is activated (either with the vibration only setting or the vibration and tone setting), the 
icon appears on the display.
28