BUSY CHANNEL LOCKOUT
This function is used in order to prevent transmitting on a channel that somebody else is currently using. When turned ON, a beep sounds when you press the PTT switch while another party is using the channel, and you cannot transmit.
1Turn the transceiver power OFF.
2 Press and hold the MENU key while turning the transceiver power ON (for 1 second).
3 Press the ▲ or ▼ key to select “
”.
4 Press the MENU key to select “
” (busy
channel lockout on) or “
” (busy channel lockout off).
5 Press the PTT, MON, or CAL key to exit Setting Mode.
TRANSCEIVER BEEP
When you turn the transceiver power ON or press a key, a beep will emit from the transceiver. If desired, you can turn this feature off:
31