•When set to notify you via a tone only (setting 1), the tone is emitted when a busy signal is received and the
QT/ DQT signalling matches. The tone will sound for
15 seconds before turning off. While the tone sounds, you will not hear any audio from the speaker. To turn the tone off and listen to the received call, press any key. After the call is finished, the transceiver will wait for 10 seconds before resetting the Incoming Call Notification. If you receive a new call within those 10 seconds, the tone will not sound. If no call is received within 10 seconds, Incoming Call Notification will reset so that the next time a call is received, the tone will sound again.
•When set to notify you via vibration only (setting 2), the transceiver vibrates when a busy signal is received and the QT/ DQT signalling matches. Audio can be heard from the speaker while the transceiver vibrates. To stop the 15 second vibrator, press any key. After the call is finished, the transceiver will wait for 10 seconds before resetting the Incoming Call Notification.
•When set to notify you via both a tone and through vibration (setting 3), the tone is emitted and the transceiver vibrates when a busy signal is received and the QT/ DQT signalling matches. As with a tone only, you will not hear audio from the speaker until the tone is stopped by pressing a key or the 15 second tone stops. After the call is finished, the transceiver will wait for 10 seconds before resetting the Incoming Call Notification.
29