Audio Adjustment
3. Boost or attenuate the selected band with the 5/° buttons.
The display shows “+6” – “–6”.
“ ”
Note:
•If you make adjustments when a curve other than “CUSTOM” is selected, the newly adjusted curve will replace the previous adjusted curve. Then a new curve with “CUSTOM” appears on the display while selecting the equalizer curve. (Refer to page 37.)
Equalizer Curve Fine Adjustment
You can adjust the center frequency and the Q factor (curve characteristics) of each cur- rently selected curve band
Level (dB)
Q=2N | Q=2W | ||
|
|
|
|
Center frequency | Frequency (Hz) |
|
|
|
1.Press the AUDIO button for 2 seconds to select Equalizer Curve Fine Adjustment.
2.Press the AUDIO button to
select the desired band for adjustment.
3. Select the desired frequency with the 2/3 buttons.
Low: 40 +=80 +=100 +=160 (Hz)
Mid: 200 +=500 +=1k +=2k (Hz)
High: 3.15k +=8k +=10k +=12.5k (Hz)
4. Select the desired Q factor with the 5/° buttons.
2N += 1N += 1W += 2W
Note:
•If you make adjustments when a curve other than “CUSTOM” is selected, the newly adjusted curve will replace the previous adjusted curve. Then a new curve with “CUSTOM” appears on the display while selecting the equalizer curve. (Refer to page 37.)
39