Kenwood TS-480HX, TS-480SAT instruction manual Specifications, Receiver

20 SPECIFICATIONS

Transmitter				TS-480SAT		TS-480HX
Spurious emissions	160 m ~ 10 m band	–50 dB or less
	6 m band	–60 dB or less
Carrier suppression (SSB)		40 dB or more
Unwanted sideband suppression		40 dB or more
(modulation frequency 1.0 kHz)
Maximum frequency	Wide	±5 kHz or less
deviation (FM)	Narrow	±2.5 kHz or less
XIT shift frequency range		±9.99 kHz
Microphone impedance		600 Ω
Receiver				TS-480SAT		TS-480HX
Circuit type		SSB/ CW/ AM/ FSK: Double conv. superheterodyne
		FM: Triple conversion superheterodyne
Frequency range		0.05	~ 59.999.999 MHz
		1st IF:		73.095 MHz
Intermediate Frequency (IF)		2nd IF:		10.695 MHz
		3rd IF (FM only): 455 kHz
		0.5 ~ 1.705 MHz:			4 ∝V or less
	SSB/ CW/ FSK	1.705 ~ 24.5 MHz:			0.2 ∝V or less
	(S/N 10 dB)	24.5	~ 30.0 MHz:		0.13 ∝V or less
		50.0	~ 54.0 MHz:		0.13 ∝V or less
Sensitivity		0.5 ~ 1.705 MHz:			31.6 ∝V or less
	AM	1.705 ~ 24.5 MHz:			2.0 ∝V or less
	(S/N 10 dB)	24.5	~ 30.0 MHz:		1.3 ∝V or less
		50.0	~ 54.0 MHz:		1.3 ∝V or less
	FM	28.0	~ 30.0 MHz:		0.22 ∝V or less
	(12 dB SINAD)	50.0	~ 54.0 MHz:		0.22 ∝V or less
	SSB	–6 dB:		2.4 kHz or more, –60 dB:		4.4 kHz or less
Selectivity
	AM	–6 dB:		5.0 kHz or more, –60 dB:		40.0 kHz or less
	FM	–6 dB:		12.0 kHz or more, –50 dB:		25.0 kHz or less
Image rejection		70 dB or more
1st IF rejection		70 dB or more
Beat Cancel attenuation (at 1 kHz)		40 dB or more
RIT shift frequency range		±9.99 kHz
		0.5 ~ 1.705 MHz:			18.0 ∝V or less
	SSB/ CW/ FSK/ AM	1.8 ~ 30.0 MHz: 1.8 ∝V or less
Squelch sensitivity		50.0	~ 54.0 MHz:		1.1 ∝V or less
	FM	28.0	~ 30.0 MHz:		0.2 ∝V or less
		50.0	~ 54.0 MHz:		0.2 ∝V or less
Audio output (8 Ω, 10% distortion)		2.0 W or more
Audio output impedance (EXT.SP)		8 Ω

92