3 GETTING ACQUAINTED
|
| #7 |
|
| #6 |
|
| #5 |
|
| #4 |
@0@1@2@3@4@5@6@7@8@9 | #0 | #1#2#3 |
@0RtEQsT
ÒRtEQÓ appears when the RX Equalizer function is ON {page 64}. ÒEQsTÓ appears when the TX Equalizer function is ON {page 38}.
@1tBCs2
Ò1tBCÓ or ÒBCs2Ó appears, as you select the DSP Beat Cancel 1 or Beat Cancel 2 {page 47}.
@21tNRs2
Ò1tNRÓ or ÒNRs2Ó appears, depending on whether DSP Noise Reduction 1 (Line Enhanced method) or Noise Reduction 2 (SPAC method) is selected {page 47}.
@3M.CH
Appears in Memory Recall mode {page 51}.
@4M.SCR
Appears in Memory Scroll mode {page 52}.
@5DNL
Appears when the Digital Noise Limiter function is ON {page 47}.
@6
Shows the Memory Channel number for the transceiver. In Menu mode, it displays the Menu No. In Quick Memory mode, it shows the Quick Memory number location (the Quick Memory number ranges from Ò0_Ó to Ò9_Ó) {page 55}.
@7
Displays a communication mode {page 19}.
@8AUTO
Appears when Auto Mode function is ON {page 61}.
@9
The transceiver operating frequency display. In Menu mode, it displays the parameters.
#0
In the normal operating mode, it displays the transceiver status and Menu item descriptions when necessary. While the RIT, XIT or SPLIT function is turned ON, it is used to display the frequency information for these functions {pages 35, 37}.
#1tAs
ÒtAÓ or ÒAsÓ appears while VFO A is selected {pages 18, 30}. ÒAÓ appears while Menu A is being accessed in the Menu mode {page 22}.
#2tBs
ÒtBÓ or ÒBsÓ appears while VFO B is selected {pages 18, 30}. ÒBÓ appears while Menu B is being accessed in the Menu mode {page 22}.
#3tMs
ÒtMÓ or ÒMsÓ appears while a simplex memory channel is selected {page 50}.
#4RIT
Appears when Receive Incremental Tuning function is ON {page 35}.
#5XIT
Appears when Transmit Incremental Tuning function is ON {page 37}.
#6CT
ÒTÓ appears when the Tone function is ON {page 32}. ÒCTÓ appears when the CTCSS (Continuous Tone Coded Squelch System) is ON {page 33}.
#7PC
Appears when the transceiver is being controlled by a PC {page 67}.
14