Kenwood TS-480HX, TS-480SAT TM-D700A, Connecting Peripheral Equipment SKY Command II K-TYPE only

14CONNECTING PERIPHERAL EQUIPMENT SKY COMMAND II (K-TYPE ONLY)

■TM-D700A

In order to connect the TS-480 transceiver to the TM-D700A transceiver, you need to prepare

3 cables by yourself. For the connection between the COM connectors on the 2 transceivers, you may use a commercially available RS-232C cross- wired cable.

TM-D700A	TS-480
transceiver	transceiver
COM	COM
connector	connector

Note:

◆Switch OFF both the TM-D700 and TS-480 transceiver before making the connection.

◆The TM-D700A transceiver automatically transmits its call sign in Morse code at regular intervals because of legal requirements; therefore, transmit sidetone must be output from the TS-480 transceiver.

◆When the TM-D700A transceiver is too close to the TS-480 transceiver, unwanted feedback may cause malfunction.

◆Do not share a regulated power supply between the TM-D700A transceiver and the TS-480 transceiver. Unwanted feedback may cause malfunction.

				UP
				8 V DC
	3.5 mm (1/8 ")			GND
				STBY (MIC)
		speaker jack		GND (MIC)
							RJ-45
				MIC
				NC		MIC jack
				DWN
			UP
			8 V DC
			GND
			STBY (MIC)
			GND (MIC)
	RJ-45		MIC		3.5 mm (1/8 ")
			NC
MIC jack			DWN		speaker jack

80