WARNINGS, CAUTIONS AND NOTES
The following notations are used to place special emphasis on procedures, or to call attention to precautionary measures.
Warning
Caution
Note
An operating procedure, practice and so forth, which if not followed correctly, could result in personal injury, or loss of life.
An operating procedure, practice and so forth, which if not followed correctly, could result in damage to, or destruction of equipment.
An operating procedure, condition and so forth, to which special attention should be paid.
General Safety Precautions
The following are general safety precautions that are not related to any specific procedures and therefore do not appear elsewhere in this publication. These are recommended precautions that personnel must understand and apply, in addition to the precautions listed in the Information for Safe, Efficient Operation section.
Warning
High
Voltage
Do not touch the antenna and the RF connectors when the transceiver operates.
During transmission, high RF voltages appear at the RF connectors, the antenna cables, and on the antenna itself. These voltages may cause severe injury or even death on contact.
Operating and maintenance personnel must be familiar with the applicable safety requirements before attempting to install or operate the transceiver. Severe injury or death could result from failure to comply with the safety practices.