Basic Operation
LED Status
The Power and Link LED indicators on the Sender and Receiver unit provide basic information on the current status of the DVI ELR Extender over one CAT5.
The information, in the table below, applies to both the Sender and Receiver unit.
LED |
| Status |
| Description | |||||
Power |
| Solid blue |
| • | Power connected to Sender / | ||||
|
| ||||||||
|
|
|
|
|
|
|
|
| Receiver unit. |
|
| Off |
| • | No power supplied to the Sender / | ||||
|
|
|
|
|
|
|
|
| Receiver unit. |
|
|
|
|
|
|
|
| • | Make sure each power supply |
|
|
|
|
|
|
|
|
| is connected to the Sender and |
|
|
|
|
|
|
|
|
| Receiver unit. |
|
|
|
|
|
|
|
| • | Make sure that the outlet is “live”. |
|
|
|
|
|
|
|
|
|
|
Link |
| Solid green |
| • | Link integrity between the Sender | ||||
|
|
|
|
|
|
|
|
| and Receiver unit is good. |
|
|
|
|
|
|
|
| • | Source is connected to the Sender |
|
|
|
|
|
|
|
|
| unit. |
|
|
|
|
|
|
|
| • | Display (or other sink device) is |
|
|
|
|
|
|
|
|
| connected to the Receiver unit. |
|
| Flashing |
|
|
|
| • | No source is connected to the | |
|
|
|
| ||||||
|
| green |
|
|
|
|
|
| Sender unit. |
|
|
|
|
|
|
|
| • | Display (or other sink device) is not |
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
| connected to the Receiver unit. |
|
| Off |
| • | Link integrity is compromised. | ||||
|
|
|
|
|
|
|
| • | Check the cable between the Link |
|
|
|
|
|
|
|
|
| port on the Sender and Receiver unit. |
|
|
|
|
|
|
|
|
|
|
page 10