Gefen EXT-DVI-1CAT5-ELR user manual DIP Switch Configuration, Default Settings

Advanced Operation

DIP Switch Configuration

There is a bank of four DIP switches on the bottom of the Sender and Receiver unit. Remove the piece of colored tape to reveal the DIP switch bank. These DIP switches provide control over EDID management, HPD pass-through, power modes, and range selection.

ON SAB

1 2 3 4

ON SAB

1 2 3 4

Bottom of Sender / Receiver unit

Default Settings

Description		Sender unit				Receiver unit
Default settings for Sender and Receiver unit.
				ON	SAB			ON	SAB
•	Internal EDID
•	HPD is high
•	Green mode is disabled		1 2		3 4		1 2		3 4

•Long-Reach mode is disabled

page 11