Section
09Audio Adjustments
Display | Equalizer curve |
CUSTOM | Custom |
|
|
EQ FLAT | Flat |
|
|
Super bass | |
|
|
!CUSTOM is an adjusted equalizer curve that you create. If you make adjustments to an equalizer curve, the equalizer curve set- ting will be memorized in CUSTOM.
!When EQ FLAT is selected no supplement or correction is made to the sound. This is useful to check the effect of the equalizer curves by switching alternatively between EQ FLAT and a set equalizer curve.
%Press EQ to select the equalizer.
Press EQ repeatedly to switch between the fol- lowing equalizers:
POWERFUL—NATURAL—VOCAL—CUSTOM
—EQ FLAT—SPR-BASS
Adjusting equalizer curves
You can adjust the currently selected equalizer curve setting as desired. Adjusted equalizer curve settings are memorized in CUSTOM.
1Press AUDIO to select EQ.
2Press c or d to select the equalizer band to adjust.
3Press a or b to adjust the level of the equalizer band.
+6 to
or decreased.
# You can then select another band and adjust the level.
Note
If you make adjustments, CUSTOM curve is up- dated.
Fine-adjusting equalizer curve
You can adjust the center frequency and the Q factor (curve characteristics) of each currently selected curve band
Level (dB)
Q=2N Q=2W
Center frequency Frequency (Hz)
1Press AUDIO and hold until frequency and the Q factor (e.g., F- 80:Q1W) appears in the display.
2Press AUDIO to select the band for ad- justment from among low, mid and high. Press AUDIO repeatedly to switch between the following functions:
3Press c or d to select the desired fre- quency.
Low:
Mid:
High:
4Press a or b to select the desired Q fac-
tor.
Note
If you make adjustments, CUSTOM curve is up- dated.
Adjusting loudness
Loudness compensates for deficiencies in the low- and
1 Press AUDIO to select LOUD.
32 En