Pioneer RDS DEH-P40MP Tuner Listening to the radio, Introduction of advanced tuner operation

Tuner

Listening to the radio

1 2 3

5 4

1Band indicator

Shows which band the radio is tuned to, MW/LW or FM.

2Frequency indicator

Shows the frequency to which the tuner is tuned.

3Stereo (5) indicator

Shows when the selected frequency is being broadcast in stereo.

4Preset number indicator

Shows which preset has been selected.

5LOC indicator

Shows when local seek tuning is on.

1Press SOURCE to select the tuner. Press SOURCE until you see TUNER dis- played.

2Press BAND to select a band.

Press BAND until the desired band is dis- played, F1, F2 for FM or MW/LW.

3To perform manual tuning, briefly press c or d.

The frequencies move up or down step by step.

Section

03

4 To perform seek tuning, press and hold	English
c or d for about one second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
# You can cancel seek tuning by briefly pressing
c or d.
# If you press and hold c or d you can skip sta-
tions. Seek tuning starts as soon as you release
the button.

Introduction of advanced tuner operation

%Press FUNCTION to display the function names.

Press FUNCTION repeatedly to switch be- tween the following functions:

BSM (best stations memory)—REG (regional)

—LOCAL (local seek tuning)—TA (traffic an- nouncement standby)—AF (alternative fre-

quencies search)

# To return to the frequency display, press

BAND.

# If MW/LW band is selected, you can only se-

lect BSM or LOCAL.

# If you do not operate the function within about

30 seconds, the display is automatically returned to the frequency display.

Storing and recalling broadcast frequencies

If you press any of the preset tuning buttons 1 to 6 you can easily store up to six broadcast frequencies for later recall with the touch of a button.

!Up to 12 FM stations, six for each of the two FM bands, and six MW/LW stations can be stored in memory.

En 9