3 | CONTROLS AND INDICATORS |
|
|
| NOTE |
This section defines each control of the transceiver. For detailed operating instructions refer to section 4 of this manual.
Refer to Figure 1 for the location of the following controls, indicators, and connections.
3.1 CONTROLS AND CONNECTIONS
qPOWER SWITCH/VOLUME CONTROL
Turns the transceiver on and off, and adjusts the volume.
wSQUELCH CONTROL (SQL)
Sets the point at which random noise on the channel does not activate the audio circuits but a received signal does. This point is called the squelch threshold. Further adjustment of the squelch control will degrade the reception of wanted transmissions.
e
Activates transmission.
rUP (
) KEY
Selects the desired channel. Each press increases the channel number. When held down, the channels increase continuously.
tDOWN (
) KEY
Selects the desired channel. Each press decreases the channel number. When held down, the channels decrease continuously.
y16/9 KEY
Immediately recalls channel 16 from any channel location. Holding down this key recalls channel 9. When the WX key is pressed while holding down this key, the mode toggles between USA, International and Canadian.
uWX KEY
Immediately recalls a weather channel from any channel location. Recalls the previous channel when the WX key is pressed again.
HX350S | Owner’s Manual | page 3 |