Standard Horizon Ff520 owner manual Mounting the FF520, Installation, Connections

Page 7

2. MOUNTING THE FF520

The FF520 must be properly installed according the following instructions to get the best possible performance.

NOTE

TRANSDUCER: refer to Chapter 6 and to the Installation Manual supplied with the transducer.

2.0INSTALLATION

The FF520 must be mounted in a dry, cool and well ventilated location. The FF520 can be mounted horizontally or vertically. After the cables have been run, and connected as per Section 2.2, mount the FF520 in the desired location using the supplied hardware.

Figure 2.0 - The FF520 Installing

2.1CONNECTIONS

Figure 2.1 - The FF520

FF520

 

Page 9

 

Image 7
Contents FF520 FCC Compliance Statement Table of Contents Index General Information IntroductionPacking List Replacement part0 FF520 Packing List Mounting the FF520 InstallationConnections FF520 Connecting the GPS Chart Plotters to the FF520CP155C/CP1000C/CP180/CP180i/CPV350 connections to FF520 CP180/CP180iCPV350 FF520 Tee Cable Optional ConnectionsCP175C connections to FF520 Second temp sensor Alarm BuzzerLED Status Indicator Nmea OutputSelecting the FF520 Power ConnectionsCP180/CP180i/CPV350 0 Selecting the FF520 on CP180/CP180i/CPV350 CP155C/CP175C/CP1000CUnderstanding the Fish Finder Fish FinderColor Bar Fish Finder windowFishes Understanding the Fish Finder displayScope Operating FrequencyMenu selection for CP155C/CP175C/CP1000C Displaying the Fish FinderCustomizing the Fish Finder menu selection 0a Menu selection for CP180/CP180i/CPV350Soft Keys for CP175C/CP1000C/CPV350 Customizing the Soft Keys for CP175C/CP1000C/CPV350 KEY Operation When Fish Finder page is ShownZoom in and Zoom OUT keys Menu keyEnter key Clear keyFocus Soft Key for CP175C/CP1000C/CPV350 Controls on Chart page or Fish page in Chart/Fish dual modeMark key Shuttlepoint knobSensitivity Time Control STC Soft Key System Update menuRange Soft Key Frequency Soft KeySystem Information page for CP180/CP180i/CPV350 Fish Fish Finder Setup MenuPresets SelectionAuto Gain ModeChart/Fish Range MenuSensitivity Menu Interference RejectionGain Display Setup Keel Offset Transducer SetupLoad Settings from User C-CARD AlarmsSave Settings to User C-CARD Restore Current Preset Defaults Page FF520 Specifications SpecificationsFF520 Internal connections FF520 Internal ConnectionsSailboats Power BoatsTransducer Transducer MountingFairing Block Transducer TypesLow Profile Thru-Hull TransomOptional Transducer ID Sensors In-hullPage 0a The FF520 Tips of OperationsHOW can I SET Optimal Operating Parameters What are Preset MODES?What are Extreme Situations in Which Auto Modes MAY FAIL? What should I do if the Auto Modes FAIL? HOW can I Reduce the Surface CLUTTER? WHY do I Never see Fishes in the Range Between 0 to 2 FEET?27, 30 IndexA N D a R D H O R I Z O N L I M I T E D W a R R a N T Y
Related manuals
Manual 43 pages 11.27 Kb