CPV350
FF520
Tee Cable
Figure 2.2c - CPV350 Connection
CP175C connections to FF520
1.Cut off the "Tee" connector on the FF520 as close to the "Tee connector as possible.
2.Route the cable from the FF520 to the CP175C location.
3.Strip back the black insulation on the "Tee" cable about three inches to expose the wires inside the cable. Connect the wires from the CP175C to the FF520 "Tee" cable referring to Figure 2.2d CP175C Connection.
Figure 2.2d - CP175C Connection
2.3OPTIONAL CONNECTIONS
The FF520 has one NMEA output, one alarm buzzer output and a second input for a temperature sensor.
Figure 2.3 - The FF520 Optional Connections (I)
FF520 |
| Page 11 |
|