2.BASIC OPERATION
2.1 Turning the Power On/Off
Turn the [MODE] switch clockwise to turn the power on. The unit starts with the settings used before it was turned off last time. To turn the power off, turn the switch fully counterclockwise.
2.2 Adjusting Brilliance
Use the [BRILL] key to adjust the brilliance. The selected brilliance level is shown on the display as below. There are six levels of brilliance including off.
BRILL:0
2.3 Display Mode Selection, Description
2.3.1 Display mode selection
Seven display modes are available and you may select one of them with the [MODE] switch.
| MODE switch description | |
|
| |
MODE Switch | Function | |
Position | ||
| ||
|
| |
200K | Provides the high frequency (200KHz)normal picture on the full screen. | |
50K | Displays the low frequency (50KHz)normal picture on the full screen. | |
200/50 | Displays the normal display for high frequency (200KHz) on right half | |
and that for the low frequency (50KHz)on the left half. | ||
| ||
|
| |
200K/Z | Shows the normal display of the high frequency (200KHz) on right half | |
and its zoom display on the left half. | ||
| ||
|
| |
50K/Z | Provides the normal display of the low frequency (50KHz)on right half | |
and its zoom display on the left half. | ||
| ||
|
| |
MENU1 | Displays the main and system menus. | |
|
| |
MENU2 | Displays the main and system menus. | |
|
|