Eagle Electronics 500C manual Figuration and installation, bottom composi

Page 9

Back-up memory:

Built-in memory stores sonar records for

 

decades.

Languages:

10; menu languages selectable by user.

Sonar

 

Frequency:

50/200 kHz for SeaFinder 500CDF; 200 kHz

 

for FishMark 500C.

Transducers:

A dual-frequency Skimmertransducer with

 

built-in temperature sensor is packed with

 

the SeaFinder 500CDF. It has 35°/12° cone

 

angles. A single-frequency Skimmer trans-

 

ducer with built-in temperature sensor is

 

packed with the FishMark 500C. It has a 20°

 

cone angle. Transducers operate at speeds up

 

to 70 mph (61 kts)

Watts:

1,500 watts peak-to-peak/188 watt RMS.

Sonar sounding

 

depth capability:

SeaFinder 500CDF: 1,500 feet (450 me-

 

ters). FishMark 500C: 800 feet (244 me-

 

ters).

 

Actual capability depends on transducer con-

 

figuration and installation, bottom composi-

 

tion and water conditions. All sonar units

 

typically read deeper in fresh water than in

 

salt water.

Depth display:

Continuous display .

Audible alarms:

Deep/shallow/fish/zone.

Automatic ranging:

Yes, with instant screen updates.

Auto bottom track:

Yes.

Zoom bottom track:

Yes.

Split-screen zoom:

Yes.

3

Image 9
Contents Installation and Operation Instructions Page Table of Contents ColorLine level To turn Auto Sensitivity back on Page How this manual can get you out on the water, fast Read Me FirstPage Figuration and installation, bottom composi How Sonar Works How to Use this Manual Typographical Conventions Page Preparations Transducer InstallationSingle-frequency transom installations Pad Deadrise less than Strakes Good and poor transducer locations Transom Page Dot Alignment letters Positions Transducer Ratchets Bolt Transom Bottom Hull Flat-bottom hull Deep-vee hull Internal tooth washer TMB-S bracket Bolt Nut Flat washer Transducer mounted on trolling motor, side view Partial fish arches Hulls With Flotation Materials Transducer location High speed Trolling speed Page Epoxy transducer to hull Speed/Temperature Sensors Optional Speed Sensor Installation Good location Power Connections Power connections for the sonar unit Page Front 72.9 173.9 23.4 157.9 Millimeter 56.9 Inch In-Dash Template Face Cover Page Keyboard Basic Sonar OperationPower/lights on and off Main Menu Pages Pages Menu, showing Sonar display options Page Page Sonar Page, showing full sonar chart mode Basic Sonar Quick Reference Sonar Operations Page Page Important Tip Page Page Page ASP Advanced Signal Processing Sonar Options & Other FeaturesAlarms To adjust and turn on the shallow alarm To turn off the alarm, press ALARM↓ to Deep Alarm Enabledentexit Backlight Level Calibrate Speed Chart Speed ColorLine Thin or no ColorLine Wider ColorLine Depth Cursor ContrastDepth Range Manual Depth Range AutomaticFasTrack Fish I.D. Fish Symbols & Depths FishTrack Frequency Change Transducer Frequency SeaFinder CDF only Symbols with FishTrack depthsSonar Features menu with a frequency of 200 kHz selected HyperScroll Noise RejectionOverlay Data Page To return to the previous page, press Exit Tip Ping Speed & HyperScrollPage Pop-up Help Reset Options Reset Water Distance Screen Contrast and Backlight LevelSet Keel Offset Press MENUMENU↓ to SET Keel Offsetent Sensitivity & Auto Sensitivity Page Software Version Information Set LanguageSonar Page & Sonar Chart Display Options Sonar Chart ModePage Page Customizing the Digital Data/Chart Screen Sonar Simulator Stop Chart Surface Clarity Press ↓ or ↑ to select clarity levelEXITEXIT Units of Measure TransparencyZoom & Zoom Bar VolumeZoom Pan Troubleshooting Page Page Page Supplemental Material FCC Compliance Page Index Page Page 102 103 How to Obtain Service… Accessory Ordering Information for all countries Visit our web site
Related manuals
Manual 140 pages 6.53 Kb Manual 204 pages 38.37 Kb