Pioneer FH-P8900MD operation manual Audio menu, Using balance adjustment, Using loudness

Page 33

Audio menu

The audio menu has the following functions:

Note:

•If you do not operate the function within about 30 seconds, the display is automatically returned. (When you select the 13-band graphic equalizer mode (EQ2) or the time alignment adjustment mode (T.AL2), the display is not returned automatically.)

•“T.AL2” is displayed only when you select “FL” or “FR” in the position selector mode (POSI).

•“SW1” and “SW2” are displayed only when you select “SW” in the preout output setting mode (refer to page 41).

•“SW2” is displayed only when the subwoofer output is on in the subwoofer output mode (SW1).

•“SLA” is not displayed when you select FM tuner as the source.

•“A.EQ” is displayed after the auto-equalizer curve has been set.

Using balance adjustment

You can select a fader/balance setting that pro- vides an ideal listening environment in all occu- pied seats.

1.Press AUDIO to select the fader/balance mode.

2.Press 5 or ∞ to adjust front/rear speaker balance.

Each press of 5 or ∞ moves the front/rear speaker balance towards the front or the rear.

•“FADER F25” – “FADER R25” is displayed as the front/rear speaker balance moves from front to rear.

•“FADER FR00” is the proper setting when only two speakers are used.

3.Press 2 or 3 to adjust left/right speaker balance.

Each press of 2 or 3 moves the left/right speaker balance towards the left or the right.

•“BALANCE L25” – “BALANCE R25” is dis- played as the left/right speaker balance moves from left to right.

Using loudness

Loudness compensates for deficiencies in the low- and high-sound ranges at low volume.

1.Press AUDIO and then press LOUD to select the loudness mode.

2.Press LOUD to turn the loudness on.

“LOUDNESS ON” appears in the display.

• Press LOUD again to turn loudness off.

Using sound field control, octaver and BBER sound

SFC (sound field control) incorporates four pro- grams reproducing the typical sound field of a studio, club, concert hall or dome. This function makes it possible to reproduce the realistic sound fields of the four programs in your car. Octaver makes the bass sound louder.

BBE sound processing technology makes music sound “live”. Highs are clearer, naturally brilliant and more finely detailed. Lows are tight, well defined and harmonically rich.

Note:

•Manufactured under license from BBE Sound, Inc. The mark BBE is a trademark of BBE Sound, Inc.

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS

32

Page 32 Page 34
Image 33
Page 32 Page 34
Contents FH-P8900MD Contents Understanding built-in CD player error Selecting channels from the presetUnderstanding built-in MD player error Understanding auto-equalizing errorVolume Remote ControllerKey Finder Head unitPrecaution About this manualPlayback of MDs featuring long recordings About the demo mode Resetting the microprocessorReverse mode Feature demoBatteries Remote controller and carePress Audio to select the desired mode Using the remote controllerBasic Operation Setting the display angleTurning a source on or off AUX Ô Source OFFSoft KEY operation Switching the function of the multi-func- tion buttonsPress Next to display Func Example of multi-function button opera- tionPress Next repeatedly until Func appears Press Func to enter the function menuKey guidance indicator PGM button functionsSource Function name Tuner Display and indicatorsBasic operation Press up or down Source to select the tunerTuner function menu Storing and recalling broadcast stationsStoring the strongest broadcast stations Storing broadcast stationsTuning in strong signals Selecting stations from the pre- set channel listPress any of the buttons 1 6 to recall the desired station Built-in CD Player Press CD Eject to eject the CDFront panel opens and the CD is ejected Repeating play Switching and scrolling the titleBuilt-in CD player function menu Button OperationScanning tracks of a CD Playing tracks in random orderSelecting tracks from the track title list Press Next until the desired track title appearsPausing CD playback Entering disc titlesPause lets you temporarily stop playback of the CD Press MD Eject to open the front panel Built-in MD PlayerPress MD Eject to eject the MD Front panel opens and the MD is ejectedScrolls the displayed title Built-in MD player function menuScanning tracks of an MD Pause lets you temporarily stop playback of the MD Pausing MD playbackDisc multi-CD player Multi-CD PlayerSelecting a disc directly Press up or down Source to select the multi-CD playerMulti-CD player function menu has the fol- lowing functions Multi-CD player function menuScanning CDs and tracks Select the repeat rangeRefer to Repeating play on Press 5 or ∞ to select letters, numbers and symbols Press ABC to switch the character modeSelecting discs from the disc title list Press 5 or ∞ to play a disc you want to enter the titleUsing compression and dynamic bass emphasis Using ITS memoryProgramming tracks in ITS memory Erasing a track from ITS memory Playback from ITS memoryErasing a CD from ITS memory Press ITS.P to turn ITS play on TV Tuner QBand WPreset number eChannelTV tuner function menu Changing a bandSelecting channels from the pre- set channel list TV tuner function menu has the following functionsAdjusting the audio easily Audio AdjustmentsAdjusting the audio finely Extra functionsUsing loudness Using balance adjustmentPress 2 or 3 to adjust left/right speaker balance Audio menuAdjusting 13-band graphic equal- izer Adjusting equalizer curvesSwitching the octaver setting Adjusting BBE sound levelRecall the equalizer curve you want to adjust Using position selectorPress 5 or ∞ to adjust the level of the equalizer band Button PositionUsing subwoofer output Using time alignmentAdjusting time alignment Button Type of carAdjusting subwoofer settings Using the high pass filterSetting the high pass filter for front speakers Setting the high pass filter for rear speakersUsing the auto-equalizer Adjusting source levelsSwitching the digital attenuator Creating the auto-equalizer curveCarrying out auto-equalizing Before operating the auto-equalization functionPress up or down Source to turn the source off Turn the ignition switch to on or ACCInitial settings menu Initial SettingsUsing reverse mode Using the feature demoSetting the FM tuning step Setting preout outputSetting the AM tuning step Button Tuning stepAttenuating volume Displaying and setting the clockOther Functions Switching the dimmer setting Adjusting the brightnessSetting the entertainment display Changing the display formSetting the background still picture Using the AUX sourceSelecting AUX as the source Entering the AUX titleAdditional Information CD player and careCD-R and CD-RW discs English Español Deutsch Français MD player and careUnderstanding built-in CD player error messages Understanding built-in MD player error messagesDisplay Cause Remedy Error Check MIC Understanding auto-equalizing error messagesError Check Speaker Error Check SystemColors correctly Connecting the unitsSame function ACC positionConnection Diagram English Español Do not close this area InstallationInstallation using the screw holes on the side of the unit ScrewFactory radio mounting bracket Specifications English Español Deutsch Français Italiano Nederlands Page Page KICFF/01C00001 Meguro 1-CHOME, MEGURO-KU, Tokyo 153-8654, Japan
Top Page Image Contents