Pioneer FH-P8900MD operation manual Changing the display form, Adjusting the brightness

Page 44

Other Functions

Changing the display form

This product is equipped with two basic dis- plays. You can select the desired display.

1.Press NEXT to display “C.MENU”. Press NEXT until “C.MENU” appears.

2.Press C.MENU and then press D.FORM to select the display form mode.

3.Press either FORM 1 or FORM 2 to select the desired display form.

Adjusting the brightness

Display brightness adjustment lets you adjust the display for easier viewing when lighting con- ditions change.

1.Press NEXT to display “C.MENU”. Press NEXT until “C.MENU” appears.

2.Press C.MENU and then press BRGHT to select the brightness mode.

3.Press 2 or 3 to adjust the brightness.

Each press of 2 or 3 increases or decreas- es the brightness.

•“00” – “31” is displayed as the brightness is increased or decreased.

Switching the dimmer setting

To prevent the display from being too bright at night, the display is automatically dimmed when the car’s headlights are turned on. You can switch the dimmer on or off.

1.Press NEXT to display “C.MENU”. Press NEXT until “C.MENU” appears.

2.Press C.MENU and then press DMMER to select the dimmer mode.

3.Press DMMER to turn the dimmer on.

“ON” appears on the display.

• Press DMMER again to turn the dimmer off.

Selecting the wall paper pattern

The wall paper pattern is only for display form 2 “FORM 2”, and there are three patterns to choose from.

•When you select “FORM 1”, “PTRN” is not displayed and this mode is inactive.

1.Press NEXT to display “C.MENU”. Press NEXT until “C.MENU” appears.

2.Press C.MENU and then press PTRN to select the wall paper pattern mode.

3.Press any of the buttons A – C to select the desired pattern.

Setting the entertainment display

You can change the display to the movie screens, the spectrum analyzer displays, etc., while listening to any source.

Setting the movie screen

There are two stored movie screens to select from.

1.Press ENT and then press MOVIE to select the movie mode.

2.Press any of the buttons MOVIE1, MOVIE2 or ALL to select the desired movie.

•When you press ALL, you can display movies 1 and 2 sequentially.

Note:

•The movie screen will disappear temporarily when you perform other operations, but will be displayed again after three seconds.

Setting the spectrum analyzer display

There are two stored spectrum analyzer dis- plays to select from.

1.Press ENT and then press S/A to select the spectrum analyzer mode.

2.Press S/A1 or S/A2 to select the desired spectrum analyzer.

Note:

•The spectrum analyzer display will disappear tem- porarily when you perform other operations, but will be displayed again after three seconds.

Setting the background visual

The background visuals are only for display form 1 “FORM 1”. There are five stored back- ground visuals to select from.

•When you select “FORM 2”, “BG” is not dis- played and this mode is inactive.

43

Page 43 Page 45
Image 44
Page 43 Page 45
Contents FH-P8900MD Contents Selecting channels from the preset Understanding built-in CD player errorUnderstanding built-in MD player error Understanding auto-equalizing errorRemote Controller VolumeKey Finder Head unitPlayback of MDs featuring long recordings PrecautionAbout this manual Resetting the microprocessor About the demo modeReverse mode Feature demoRemote controller and care BatteriesUsing the remote controller Press Audio to select the desired modeSetting the display angle Basic OperationTurning a source on or off AUX Ô Source OFFSwitching the function of the multi-func- tion buttons Soft KEY operationExample of multi-function button opera- tion Press Next to display FuncPress Next repeatedly until Func appears Press Func to enter the function menuSource Function name Key guidance indicatorPGM button functions Display and indicators TunerBasic operation Press up or down Source to select the tunerStoring and recalling broadcast stations Tuner function menuStoring the strongest broadcast stations Storing broadcast stationsPress any of the buttons 1 6 to recall the desired station Tuning in strong signalsSelecting stations from the pre- set channel list Front panel opens and the CD is ejected Built-in CD PlayerPress CD Eject to eject the CD Switching and scrolling the title Repeating playBuilt-in CD player function menu Button OperationPlaying tracks in random order Scanning tracks of a CDSelecting tracks from the track title list Press Next until the desired track title appearsPause lets you temporarily stop playback of the CD Pausing CD playbackEntering disc titles Built-in MD Player Press MD Eject to open the front panelPress MD Eject to eject the MD Front panel opens and the MD is ejectedBuilt-in MD player function menu Scrolls the displayed titleScanning tracks of an MD Pausing MD playback Pause lets you temporarily stop playback of the MDMulti-CD Player Disc multi-CD playerSelecting a disc directly Press up or down Source to select the multi-CD playerMulti-CD player function menu Multi-CD player function menu has the fol- lowing functionsRefer to Repeating play on Scanning CDs and tracksSelect the repeat range Press ABC to switch the character mode Press 5 or ∞ to select letters, numbers and symbolsSelecting discs from the disc title list Press 5 or ∞ to play a disc you want to enter the titleProgramming tracks in ITS memory Using compression and dynamic bass emphasisUsing ITS memory Playback from ITS memory Erasing a track from ITS memoryErasing a CD from ITS memory Press ITS.P to turn ITS play onQBand WPreset number eChannel TV TunerChanging a band TV tuner function menuSelecting channels from the pre- set channel list TV tuner function menu has the following functionsAudio Adjustments Adjusting the audio easilyAdjusting the audio finely Extra functionsUsing balance adjustment Using loudnessPress 2 or 3 to adjust left/right speaker balance Audio menuAdjusting equalizer curves Adjusting 13-band graphic equal- izerSwitching the octaver setting Adjusting BBE sound levelUsing position selector Recall the equalizer curve you want to adjustPress 5 or ∞ to adjust the level of the equalizer band Button PositionUsing time alignment Using subwoofer outputAdjusting time alignment Button Type of carUsing the high pass filter Adjusting subwoofer settingsSetting the high pass filter for front speakers Setting the high pass filter for rear speakersAdjusting source levels Using the auto-equalizerSwitching the digital attenuator Creating the auto-equalizer curveBefore operating the auto-equalization function Carrying out auto-equalizingTurn the ignition switch to on or ACC Press up or down Source to turn the source offInitial Settings Initial settings menuUsing reverse mode Using the feature demoSetting preout output Setting the FM tuning stepSetting the AM tuning step Button Tuning stepOther Functions Attenuating volumeDisplaying and setting the clock Adjusting the brightness Switching the dimmer settingSetting the entertainment display Changing the display formUsing the AUX source Setting the background still pictureSelecting AUX as the source Entering the AUX titleCD-R and CD-RW discs Additional InformationCD player and care MD player and care English Español Deutsch FrançaisDisplay Cause Remedy Understanding built-in CD player error messagesUnderstanding built-in MD player error messages Understanding auto-equalizing error messages Error Check MICError Check Speaker Error Check SystemConnecting the units Colors correctlyACC position Same functionConnection Diagram English Español Installation Do not close this areaFactory radio mounting bracket Installation using the screw holes on the side of the unitScrew Specifications English Español Deutsch Français Italiano Nederlands Page Page Meguro 1-CHOME, MEGURO-KU, Tokyo 153-8654, Japan KICFF/01C00001
Top Page Image Contents