Pioneer FH-P8900MD operation manual Initial Settings, Initial settings menu, Using reverse mode

Page 41

Initial Settings

Initial settings menu

The initial settings menu has the following func- tions:

Initial settings menu operation

You can operate the initial settings menu only when the source is off.

1.Press (up or down) SOURCE to turn the source off.

2.Press and hold 1 to enter the initial settings menu.

•When the source is off, you can check the location of “ 1” by turnig on the feature demo.

•You can also enter the initial settings menu by pressing and holding FUNCTION on the remote controller.

Note:

• Press BAND to cancel the initial settings menu.

Using reverse mode

If you do not carry out an operation within about 30 seconds, screen indications will start to reverse, and then continue reversing every 10 seconds.

You can turn the reverse mode on or off.

1.With the source turned off, press and

hold 1 to select the reverse mode.

2.Press REV to turn the reverse mode on. “ON” appears in the display.

•Press REV again to turn the reverse mode off.

Using the feature demo

The feature demo automatically starts when power to this product is switched off while the ignition switch is set to ACC or ON.

You can turn the feature demo on or off.

1.With the source turned off, press and

hold 1.

2.Press F.DEMO to select the feature demo mode.

3.Press F.DEMO to turn the feature demo on.

“ON” appears in the display.

•Press F.DEMO again to turn the feature demo off.

Note:

•The red lead (ACC) of this product should be con- nected to a terminal coupled with ignition switch ON/OFF operations. If this is not done, the vehicle battery may be drained.

Switching the auxiliary setting

It is possible to use auxiliary equipment with this product.

Turn the auxiliary setting on when using exter- nal equipment connected to this product.

1.With the source turned off, press and

hold 1.

2.Press AUX to select the AUX mode.

3.Press AUX to turn AUX on.

“ON” appears in the display.

• Press AUX again to turn AUX off.

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS

40

Image 41

Contents FH-P8900MD Contents Understanding built-in CD player error Selecting channels from the presetUnderstanding built-in MD player error Understanding auto-equalizing errorVolume Remote ControllerKey Finder Head unitPlayback of MDs featuring long recordings PrecautionAbout this manual About the demo mode Resetting the microprocessorReverse mode Feature demoBatteries Remote controller and carePress Audio to select the desired mode Using the remote controllerBasic Operation Setting the display angleTurning a source on or off AUX Ô Source OFFSoft KEY operation Switching the function of the multi-func- tion buttonsPress Next to display Func Example of multi-function button opera- tionPress Next repeatedly until Func appears Press Func to enter the function menuSource Function name Key guidance indicatorPGM button functions Tuner Display and indicatorsBasic operation Press up or down Source to select the tunerTuner function menu Storing and recalling broadcast stationsStoring the strongest broadcast stations Storing broadcast stationsPress any of the buttons 1 6 to recall the desired station Tuning in strong signalsSelecting stations from the pre- set channel list Front panel opens and the CD is ejected Built-in CD PlayerPress CD Eject to eject the CD Repeating play Switching and scrolling the titleBuilt-in CD player function menu Button OperationScanning tracks of a CD Playing tracks in random orderSelecting tracks from the track title list Press Next until the desired track title appearsPause lets you temporarily stop playback of the CD Pausing CD playbackEntering disc titles Press MD Eject to open the front panel Built-in MD PlayerPress MD Eject to eject the MD Front panel opens and the MD is ejectedScrolls the displayed title Built-in MD player function menuScanning tracks of an MD Pause lets you temporarily stop playback of the MD Pausing MD playbackDisc multi-CD player Multi-CD PlayerSelecting a disc directly Press up or down Source to select the multi-CD playerMulti-CD player function menu has the fol- lowing functions Multi-CD player function menuRefer to Repeating play on Scanning CDs and tracksSelect the repeat range Press 5 or ∞ to select letters, numbers and symbols Press ABC to switch the character modeSelecting discs from the disc title list Press 5 or ∞ to play a disc you want to enter the titleProgramming tracks in ITS memory Using compression and dynamic bass emphasisUsing ITS memory Erasing a track from ITS memory Playback from ITS memoryErasing a CD from ITS memory Press ITS.P to turn ITS play onTV Tuner QBand WPreset number eChannelTV tuner function menu Changing a bandSelecting channels from the pre- set channel list TV tuner function menu has the following functionsAdjusting the audio easily Audio AdjustmentsAdjusting the audio finely Extra functionsUsing loudness Using balance adjustmentPress 2 or 3 to adjust left/right speaker balance Audio menuAdjusting 13-band graphic equal- izer Adjusting equalizer curvesSwitching the octaver setting Adjusting BBE sound levelRecall the equalizer curve you want to adjust Using position selectorPress 5 or ∞ to adjust the level of the equalizer band Button PositionUsing subwoofer output Using time alignmentAdjusting time alignment Button Type of carAdjusting subwoofer settings Using the high pass filterSetting the high pass filter for front speakers Setting the high pass filter for rear speakersUsing the auto-equalizer Adjusting source levelsSwitching the digital attenuator Creating the auto-equalizer curveCarrying out auto-equalizing Before operating the auto-equalization functionPress up or down Source to turn the source off Turn the ignition switch to on or ACCInitial settings menu Initial SettingsUsing reverse mode Using the feature demoSetting the FM tuning step Setting preout outputSetting the AM tuning step Button Tuning stepOther Functions Attenuating volumeDisplaying and setting the clock Switching the dimmer setting Adjusting the brightnessSetting the entertainment display Changing the display formSetting the background still picture Using the AUX sourceSelecting AUX as the source Entering the AUX titleCD-R and CD-RW discs Additional InformationCD player and care English Español Deutsch Français MD player and careDisplay Cause Remedy Understanding built-in CD player error messagesUnderstanding built-in MD player error messages Error Check MIC Understanding auto-equalizing error messagesError Check Speaker Error Check SystemColors correctly Connecting the unitsSame function ACC positionConnection Diagram English Español Do not close this area InstallationFactory radio mounting bracket Installation using the screw holes on the side of the unitScrew Specifications English Español Deutsch Français Italiano Nederlands Page Page KICFF/01C00001 Meguro 1-CHOME, MEGURO-KU, Tokyo 153-8654, Japan