Pioneer FH-P8900MD Setting preout output, Setting the FM tuning step, Setting the AM tuning step

Page 42

Initial Settings

Switching the telephone muting/attenuation setting

Sound from this product is muted or attenuated automatically when a call is made or received using a connected cellular telephone.

1.With the source turned off, press and

hold 1.

2.Press MUTE.S to select the telephone muting/attenuation mode.

3.Press MUTE.S to select the desired set- ting.

Press MUTE.S repeatedly to switch between the following settings:

TEL mute = 10dB ATT = 20dB ATT

•“20dB ATT” has a stronger effect than “10dB ATT”, and “TEL mute” has a stronger effect than “20dB ATT”.

Note:

•The sound turns off, “MUTE” or “ATT” is displayed and no audio adjustments, except volume control, are possible.

•Operation returns to normal when the phone call is ended.

Setting preout output

This product is equipped with a preout output. It can be used for subwoofer or rear output. Initially, it is set for SW (subwoofer).

When connecting a rear speaker to this output, set for REAR (rear speaker).

1.With the source turned off, Press and

hold 1.

2.Press NEXT and then press PREOUT to select the preout output setting mode.

3.Press SW (subwoofer) or REAR (rear speaker) to switch your desired preout output type.

Setting the FM tuning step

The FM tuning step employed by seek tuning can be switched between 100 kHz, the preset step, and 50 kHz.

1.With the source turned off, press and

hold 1.

2.Press NEXT and then press FMstep to select the FM tuning step mode.

3.Press the corresponding button to select the desired tuning step.

Button	Tuning step
50K	50 kHz

100K	100 kHz

Note:

•If seek tuning is performed in 50 kHz steps, stations may be tuned in imprecisely. Tune in the stations with manual tuning or use seek tuning again.

Setting the AM tuning step

The AM tuning step can be switched between 9 kHz, the preset step, and 10 kHz. When using the tuner in North, Central or South America, reset the tuning step from 9 kHz (531 – 1,602 kHz allowable) to 10 kHz (530 – 1,640 kHz allowable).

1.With the source turned off, press and

hold 1.

2Press NEXT and then press AMstep to select the AM tuning step mode.

3Press the corresponding button to select the desired tuning step.

Button	Tuning step
9K	9 kHz

10K	10 kHz

41

Image 42

Contents FH-P8900MD Contents Understanding built-in MD player error Selecting channels from the presetUnderstanding built-in CD player error Understanding auto-equalizing errorKey Finder Remote ControllerVolume Head unitPrecaution About this manualPlayback of MDs featuring long recordings Reverse mode Resetting the microprocessorAbout the demo mode Feature demoRemote controller and care BatteriesUsing the remote controller Press Audio to select the desired modeTurning a source on or off Setting the display angleBasic Operation AUX Ô Source OFFSwitching the function of the multi-func- tion buttons Soft KEY operationPress Next repeatedly until Func appears Example of multi-function button opera- tionPress Next to display Func Press Func to enter the function menuKey guidance indicator PGM button functionsSource Function name Basic operation Display and indicatorsTuner Press up or down Source to select the tunerStoring the strongest broadcast stations Storing and recalling broadcast stationsTuner function menu Storing broadcast stationsTuning in strong signals Selecting stations from the pre- set channel listPress any of the buttons 1 6 to recall the desired station Built-in CD Player Press CD Eject to eject the CDFront panel opens and the CD is ejected Built-in CD player function menu Switching and scrolling the titleRepeating play Button OperationSelecting tracks from the track title list Playing tracks in random orderScanning tracks of a CD Press Next until the desired track title appearsPausing CD playback Entering disc titlesPause lets you temporarily stop playback of the CD Press MD Eject to eject the MD Built-in MD PlayerPress MD Eject to open the front panel Front panel opens and the MD is ejectedBuilt-in MD player function menu Scrolls the displayed titleScanning tracks of an MD Pausing MD playback Pause lets you temporarily stop playback of the MDSelecting a disc directly Multi-CD PlayerDisc multi-CD player Press up or down Source to select the multi-CD playerMulti-CD player function menu Multi-CD player function menu has the fol- lowing functionsScanning CDs and tracks Select the repeat rangeRefer to Repeating play on Selecting discs from the disc title list Press ABC to switch the character modePress 5 or ∞ to select letters, numbers and symbols Press 5 or ∞ to play a disc you want to enter the titleUsing compression and dynamic bass emphasis Using ITS memoryProgramming tracks in ITS memory Erasing a CD from ITS memory Playback from ITS memoryErasing a track from ITS memory Press ITS.P to turn ITS play onQBand WPreset number eChannel TV TunerSelecting channels from the pre- set channel list Changing a bandTV tuner function menu TV tuner function menu has the following functionsAdjusting the audio finely Audio AdjustmentsAdjusting the audio easily Extra functionsPress 2 or 3 to adjust left/right speaker balance Using balance adjustmentUsing loudness Audio menuSwitching the octaver setting Adjusting equalizer curvesAdjusting 13-band graphic equal- izer Adjusting BBE sound levelPress 5 or ∞ to adjust the level of the equalizer band Using position selectorRecall the equalizer curve you want to adjust Button PositionAdjusting time alignment Using time alignmentUsing subwoofer output Button Type of carSetting the high pass filter for front speakers Using the high pass filterAdjusting subwoofer settings Setting the high pass filter for rear speakersSwitching the digital attenuator Adjusting source levelsUsing the auto-equalizer Creating the auto-equalizer curveBefore operating the auto-equalization function Carrying out auto-equalizingTurn the ignition switch to on or ACC Press up or down Source to turn the source offUsing reverse mode Initial SettingsInitial settings menu Using the feature demoSetting the AM tuning step Setting preout outputSetting the FM tuning step Button Tuning stepAttenuating volume Displaying and setting the clockOther Functions Setting the entertainment display Adjusting the brightnessSwitching the dimmer setting Changing the display formSelecting AUX as the source Using the AUX sourceSetting the background still picture Entering the AUX titleAdditional Information CD player and careCD-R and CD-RW discs MD player and care English Español Deutsch FrançaisUnderstanding built-in CD player error messages Understanding built-in MD player error messagesDisplay Cause Remedy Error Check Speaker Understanding auto-equalizing error messagesError Check MIC Error Check SystemConnecting the units Colors correctlyACC position Same functionConnection Diagram English Español Installation Do not close this areaInstallation using the screw holes on the side of the unit ScrewFactory radio mounting bracket Specifications English Español Deutsch Français Italiano Nederlands Page Page Meguro 1-CHOME, MEGURO-KU, Tokyo 153-8654, Japan KICFF/01C00001