Raymarine L470 instruction manual Zoom Screen Split/Full Menu Item, Setup Instructions

Manual Zoom

If you select Manual Zoom, you can choose the position of the zoom area yourself. Use the < and > arrows of the Page Control Pad to select Manual Zoom.

Once you make this choice, you can set the zoom area yourself. You do this after you exit the Zoom Setup Menu Item, and you are looking at the Zoom Mode display itself. You can manually move the zoom area up or down by pressing the < and V arrows of the Page Control Pad. The location of the zoom area is shown by the dark vertical line at the very right-hand edge of the display.

If you are done with your setup changes, press the CLEAR button to go back to the normal display. To select the next menu item, press the V arrow of the Page Control Pad.

Zoom Screen Split/Full Menu Item

The Zoom Screen Split/Full Menu Item is available from the FishFinder Page or the Window Page when the Zoom Mode is enabled. From the

Fig. 4-11

Zoom Screen

Split/Full

Menu Item

Zoom Select Menu (Fig. 4-10), press the V arrow of the Page Control Pad. Figure 4-11 shows this next menu item.

Zoom Split/Full

This entry indicates whether the zoom image will share the display with part of the normal display, or will use the whole display area. Use the < and > arrows on the Page Control Pad to select the type of zoom display you want.

72 Setup Instructions