Magnadyne MRC-2U Clearing All the Aquavibe Marine Remote Controller Codes, Press 2 Times and Hold

Clearing All the Aquavibe Marine Remote Controller Codes

Step 1 Step 2

Hold Solid LED

Turn on the power to the receiver’s housing.

Press and hold the button on the receiver until the LED turns on solid then release button.

Step 3

Press 2 Times and Hold Flashes 4 Times

Push the receiver button 2 more times, holding on the last push. The LED will flash 4 times indicating that all remote codes are cleared.

Step 4

Release Button

LED Off

Release the receiver’s button and the LED will turn off.

11