Removing the Remote
Removing the Remote from Holder: | Release Tab |
Press the release tab and slide out the remote. |
|
To reinstall, slide the remote into the holder until |
|
it snaps into place. |
|
Remote Installation
Inserting Strap:
Insert strap through the remote holder with tabs facing outward.
Connecting Strap:
Pull strap until the holes line up with the corre- sponding tabs to reach desired tension.
Speed-Up / Slow-Down Indicator Installation
5/16”
Hole
1.Find a desired location that is clearly visible to the driver.
2. Before installing the speed indicators, verify that there are no obstructions behind the location that could be damaged during installation.
3.Drill a 5/16” hole in the desired locations.
4. Feed the connector of the indicator cable through the hole until the LED is securely fastened.
5.Remove the backing from the indicator cover and attach the cover to the corresponding indicator.
Green Indicator = Speed-Up
Red Indicator = Slow-Down
5