Optional antenna connection
FM outdoor antenna | AM outdoor antenna |
AM outdoor antenna (not included)
AM loop antenna (included)
•Never use an outdoor antenna during a lightning storm.
•You can connect the FM outdoor antenna for better reception. Please consult your dealer for installation.
•Disconnect the FM indoor antenna if an FM outdoor antenna is installed.
•Connect the AM outdoor antenna without removing the AM loop antenna. Run 5 to 12 m
Step 2 - Inserting batteries into the remote control
■Batteries
•Insert so the poles (+ and
•Remove if the remote control is not going to be used for a long period of time. Store in a cool, dark place.
•Do not use rechargeable type batteries.
• Mishandling of batteries can cause electrolyte leakage which can damage items the fl uid contacts and may cause a fi re.
Do not:
• mix old and new batteries.
• use different types at the same time.
• heat or expose to fl ame.
• take apart or short circuit.
•attempt to recharge alkaline or manganese batteries.
•use batteries if the covering has been peeled off.
■Use
•Aim at the remote control sensor, avoiding obstacles, at a maximum range of 7 m directly in front of the unit.
Refer to page 6 for remote control signal sensor position.
Step 3 - DEMO function
When the unit is fi rst plugged in, a demonstration of its functions may be shown on the display.
If the demo setting is off, you can show a demonstration by selecting “DEMO ON”.
Press and hold [STOP 7,
The display change each time the button is held down.
DEMO OFF DEMO ON
While in standby mode, select “DEMO OFF” to reduce power consumption.
5
RQT7903
